Right Rear Bumper Work

[supraman508]

I'm getting ready to bondo the vehicle friday do to iv'e allready sanded her down.this is a pic of the top right corner of my rear bumper that i'm tryen to decide what kind of adhesive to use to glue the piece together.next after deciding that i'm planing to put some bondo over it and sand well to smooth over the blemish.This is my first time doing bodywork so i would love any suggestions, Thanks.Their is a screw in the back that is keeping the piece on.

 

[tbcmorris]

Why is this in the 7mge section this is not an engine problem

 

[tbcmorris]

Fiberglass it back together from behind...if you look in my buildthread toward the end I fixed my lip that was broken into 3 pieces this way

 

[supraman508]

Fiberglass it back together from behind...if you look in my buildthread toward the end I fixed my lip that was broken into 3 pieces this way

Thanks for the info and sorry about putting this in the wrong cat.

 

[Jeff Lange]

Thread moved.

Jeff

 

[projectsupra]

Most adhesives and fiberglass are a poor choice for this application. To do it correctly you should plastic weld it back together. If you don't have the tools and have never done this before, you're probably better off buying an OEM bumper or aftermarket bumper in better condition.

 

[hvyman]

junkyards

 

[Poodles]

Personally I'd buy a new (or used) bumpercover...

 

[tbcmorris]

Mmmm you guys are right I totally forgot that my lip was fiberglass when I gave that advice. I'm sorry.

 

[MA70AEROTOP]

I would find another bumper.