Request: 1JZ TEWD
- Thread starter Doward
- Start date
http://web.archive.org/web/20051216115247/www.1jz-gte.us/documents/SubDocs1/1JZAC.pdf
I wish there was a full TEWD out there, but the best diagrams I know of are from Rick's old site.
The 1jz AC wiring is very similar to the 7m, and most of it is body side. So getting the AC running on a swap is pretty easy.
I wish there was a full TEWD out there, but the best diagrams I know of are from Rick's old site.
The 1jz AC wiring is very similar to the 7m, and most of it is body side. So getting the AC running on a swap is pretty easy.
Doward;1398450 said:
Doward,
Are you plannaing on making the 3 speed a/c of the 1j work one the single speed ma70
The A/C is working now, 100% as it came from the factory. I found very little information on the internet regarding it, so I'll be posting a diagram for everyone later tonight. I've got to hit Ocala and Wildwood tonight, so I'm busy at the moment.
JonoTurbo;1399048 said:
The 1j system is very different from the 7ms iirc. The 7m is a dumb system and doesn't really need any thing special to work.
tissimo;1399365 said:
To be more clear: the parts of the ma70 system that you need to connect to the 1jz harness are similar to their 1jz counterparts. The only thing you ditch on the engine harness is the compressor speed sensor.
When I interchanged a section of my fusebox wiring with that from the jza70 body harness, it had the AC relay plug on it so everything was plug and play.