Would it be ok to remove the rear timing cover to reseal it, or would it cause problems with the headgasket? Would i have to remove the head or can it stay in place??
Removing Rear Timing Cover???
- Thread starter Sik89supra
- Start date
The rear timing cover has oil flowing down the back of it....it needs to seal against the headgasket and block.
To the op:
good luck getting it to seal without taking the head off...I say give it a shot but if you're still using a stock gasket then odds are it's not coming off easily!
To the op:
good luck getting it to seal without taking the head off...I say give it a shot but if you're still using a stock gasket then odds are it's not coming off easily!
Just plain not going to happen. Save yourself the frustration, pull the head and go at it that way.gaboonviper85;1395404 said:
