Hey guys just wondering if my fluidyne rad will work fine with my 1jz motor? if it does are there any issues?
thanx
thanx
radiator fitment
- Thread starter klaasjoe
- Start date
is your 1jz hydro fan or clutch fan? cuz it depends on the fan. if it is hydro it may work, if it is clutch it may work but your fan could damage your radiator when the motor moves
she's soo awesome.
@topic
hmm, with a clutch fan it will not enough space between fan and radiator? would it work with a koyo?
@topic
hmm, with a clutch fan it will not enough space between fan and radiator? would it work with a koyo?
ahhh i didnt get past the girl, took me 2 minutes to get to the bottom of the thread.
used hydro with fluidyne before, notice there was only 0.5-0.75 inch from hydro fan to crank pulley.
switch to e-fans right away because of space between fan and crank pulley. now theres about 1.5 - 2 inches of space.
used hydro with fluidyne before, notice there was only 0.5-0.75 inch from hydro fan to crank pulley.
switch to e-fans right away because of space between fan and crank pulley. now theres about 1.5 - 2 inches of space.
so either way, its kinda sounding like switching to electric fans is about the only way with a after market rad?