R154 slave cylinder bleeder screw

[bfr1992t]

Does anyone know what size the threads are?

 

[GrimJack]

Wrong forum. Thread moved.

 

[Ckanderson]

6-7mm IIRC or 1/4?

 

[Poodles]

10mm

use a line wrench!

ack, threads... dunno that one...

I BELIEVE it's the same bleeder as the brake calipers...

 

[flubyux2]

im going to say they are 10mm x 1.25. they look too coarse to be 1.0 pitch and too fine to be a 1.5. they look identical to brake line banjo bolts.

 

[bfr1992t]

Wrong forum. Thread moved.

Thanks, sorry. Had multiple browsers open on supramania and didn't pay attn to which one I started the thread from.

 

[bfr1992t]

Brake bleeders are M7x1.0 and smaller than the clutch. I've measured the hex as 10mm and the minor of the threads up near the head (possibly/likely the shoulder) as 9.43mm. I'm guessing M10x1.0 based on some really rough measurements but wanted more than a guess before buying a handful of speedbleeders (ie "I think" is not good enough, which is why I asked).

Thanks!