Put the tools down and step away from the 7M!

[IJ.]

Thought I'd post these here for the amusement factor....

Some people should NEVER work on cars.

 

[suprarx7nut]

If I understand those pics, that oil pan is going to get a very good, consistent oil flow. :nono:

Took me a second to figure out just how retarded that was. I didn't see how the pictures were related. I saw a oil adapter plate thingy, then I saw auto trans cooler lines from the radiator, then I saw a drain port in the pan.

Then, to my horror, I realized they are all connected.

At some point the 7M just isn't worth oiling at all apparently... :biglaugh:

 

[IJ.]

If I understand those pics, that oil pan is going to get a very good, consistent oil flow. :nono:

Took me a second to figure out just how retarded that was. I didn't see how the pictures were related. I saw a oil adapter plate thingy, then I saw auto trans cooler lines from the radiator, then I saw a drain port in the pan.

Then, to my horror, I realized they are all connected.

At some point the 7M just isn't worth oiling at all apparently... :biglaugh:

(you missed that he's using the Rad cooler)

 

[Poodles]

Instant milkshake when the cooler bursts...

 

[starscream5000]

He forgot the oil filter...

 

[MarkIII4Me]

Is the dipstick tube glued on with epoxy?

 

[Slow66]

I love it. Absolutely love it.

 

[SupraMario]

Sweet! I love it, the thought process that went into this one must have been like Einstein creating equations.

 

[BOOSTEDSUPRA]

HAHAHA!!!! is that jb weld on the pan gasket!!!! a guy came in yesterday with a motor for a rebuild, when i went to inspect it, take it apart, clean it and magna flux the block head ect... i couldnt get the damn thing apart, i felt like a fuknut, till i realized just how refukingtarted this guy was, JBWELD.... on EVERYTHING!!!! i was getting on here to post about it when i saw this instead!! hahaha CLASSIC!!!!!!

this could be better than ANY blonde joke!!!!! :biglaugh:

supra+know it all idiot= 1 less supra "lookie what i did mah..im edumacated!!"

 

[lewis15498]

Isnt that brass bolt in the block where the oil pressure sending unit belongs?

 

[SupraMario]

Ian, your build thread is HERE that's where these pictures should go.


:biglaugh::biglaugh::biglaugh::biglaugh::biglaugh::biglaugh::biglaugh::biglaugh::biglaugh::biglaugh:

 

[Stretch]

I thought these pics were of Ian's new build :icon_razz
eric

 

[suprarx7nut]

If I understand those pics, that oil pan is going to get a very good, consistent oil flow. :nono:

Took me a second to figure out just how retarded that was. I didn't see how the pictures were related. I saw a oil adapter plate thingy, then I saw auto trans cooler lines from the radiator, then I saw a drain port in the pan.

Then, to my horror, I realized they are all connected.

At some point the 7M just isn't worth oiling at all apparently... :biglaugh:

(you missed that he's using the Rad cooler)

Nope, I definitely caught that.

 

[IJ.]

LOL DOH for me

 

[gaboonviper85]

Ian where did you find these pics? This dude is going to fail and that sucks, but a part of me just wants to watch the carnage as I believe the owner deserves it...it's 100% obvious that he did no research at all and is just randomly doing shit!

Correct me if I'm wrong but is that RTV silicone gasket used on the exhaust header????I see orange between the head and something black..

 

[IJ.]

Came from a Cressida forum via a Bud of mine

Lucky for him it won't start/run so he hasn't killed the engine ..... yet.

 

[gaboonviper85]

It seriously takes effort to be that dumb:3d_frown:

 

[IJ.]

I like how he's blocked off the feed back into the main gallery so the engine see's NO OIL PRESSURE ever

Pure genius!

 

[gaboonviper85]

Who needs oil pressure when you such a badass oil cooler..

 

[Flateric]

Isn't the actual rad portion of this very similar although different in execution to the stock 2jz oil cooler?

Ignoring the other portion of course, just the rad/oil cooler portion though?