ProSport gauges? (Iuno what section to put it in)

[Fubar231]

Has anyone ever heard of them or anyone running them?

There so fucking cheap, i cant but help to think there just going to be trash.

Oil Psi
http://prosportgauges.com/blue/White-oil-pressure-gauge-52mm.aspx

"Premium" Oil Psi
http://prosportgauges.com/amber-white-premium-oil-pressure-gauge.aspx

Water Temp
http://prosportgauges.com/blue/White-water-temperature-gauge.aspx

"Premium" Water Temp
http://prosportgauges.com/amber-white-premium-water-temperature.aspx



Premium? What?

So confused.

 

[LilMissMkIII]

Have em and love em.

 

[Poodles]

There have been several group buys on them and they run specials for SM members...

 

[gaboonviper85]

All the electronic guages have an opening sequence where the needle does a full sweep...

Prem guages have peak hold and warning....so after a hard run you can see what your max boost, max water temp, max whatever....only the premium guages do this...the warning you can set the guage to alarm out and flash if you go over a pre set level "nice feature in oil and boost guages"...

I'll be going with the premiums myself

 

[airhead04]

I have them. They are pretty badass. They are bright though.

 

[Fubar231]

There have been several group buys on them and they run specials for SM members...

Nvm. Found it.

 

[LilMissMkIII]

The only con of them is the super loud beep on the initial sweep.

Other than that, I can't fault them

 

[Fubar231]

The only con of them is the super loud beep on the initial sweep.

Other than that, I can't fault them

What gauges do you have?

Im about to get the premium oil psi and water temp ones, but i don't know what adapters i need etc. I made a post in another thread about how to hook up an aftermarket oil psi gauge, and someone said i need a Y splitter to run it off the stock sensor location, and some other people say they jsut removed there stock sensor completely.

Im trying to figure out how people have there oil psi / water temp gauges hooked up.

 

[LilMissMkIII]

I have the metric water temp + boost guage + A/F.

Looking to get an oil pressure one also.

(I run a digi dash, and am not sure it's 100% accurate, so trying to replace all my stock guages, and then some)

 

[Fubar231]

So this is what im about to order, does this look like everything i need to install the gauges too?

(Water temp gauge radiator hose adapter piece)
http://prosportgauges.com/water-temp-sender-radiator-hose-adaptor.aspx?variation=18
got the 34mm one for the supras

(Adapters for stock oil sensor location, from 1/8 bpst to 1/8 npt)
http://prosportgauges.com/metric-adaptor-kit.aspx

and then the oil psi and water temp gauges
http://prosportgauges.com/amber-white-premium-oil-pressure-gauge.aspx?variation=136

http://prosportgauges.com/amber-white-premium-water-temperature.aspx?variation=138

So does that look like everything i need to get in order to install the gauges?

 

[Supracentral]

http://www.supramania.com/forums/showthread.php?t=114570

 

[Fubar231]

http://www.supramania.com/forums/showthread.php?t=114570

Thanks for posting that, but i found that earlier. Someone said something about them being in the group buys and i went and looked for it. 10% Discount FTW!

 

[seoul4korea]

I have the Boost and wideband and they are too nasty. I love em.

 

[TurboStreetCar]

To anyone thats using a Non premium Water temp, How accurate does it seem? And what temps are you seeing, Preferably with a stock thermostat.

Thanks.

 

[oldsking]

i freaking love mine full set-up in my car

 

[TurboStreetCar]

Non premium water temp? Factory Thermostat? What kind of readings are you getting?

 

[TurboStreetCar]

Bump, also where are you guys/girls putting your sensors?

 

[I6Boost]

Yes i have the EGT and Boost gauge, i love these gauges and all my buddys run them.

Style is great and they look bad ass.

 

[mecevans]

use the code "supramania"