Problems with Apexi Neo on 1jz

I have installed everything on my 1jz and i cannot get the Neo to show a throttle. I am seriously confused. Anyone running a neo on a 1jz have a similar problem, how did you fix it. I have tried everything to get it to work. It just says that there is zero voltage on the car and the throttle is always at full throttle. Very very strange. My avcr is working fine and sees all the same readouts correctly. Most of the connections are in the same place, so i am seriously confused. Let me know if you have any great ideas. Thanks!

I also posted this in the piggy back section, but i guess the moderators have to approve it first, so i thought i should post here.
 

BorHor

2JZ-GZE
Jan 10, 2006
6,181
1
38
36
San Jose, CA
Did you do the basic settings? I know when hooking up AFC there some settings that are needed to get the right reading. And also check the wiring.
 

Bigzavs

86.5 1JZ Single Turbo
Apr 21, 2005
2,267
0
0
39
Arlington, TX
ya, you have to set it up at 0% and 100% throttle, theres also some other settings you have to do on it. its all in the manual for it
 

BorHor

2JZ-GZE
Jan 10, 2006
6,181
1
38
36
San Jose, CA
If it always says 100% then check the wiring. same thing happened to me friend when we read the wrong diagram and had to redo it.
 

suprastanger507mgte

2x88+2x89+1x91+2x92=ME
Apr 5, 2005
3,148
6
38
Hayward , Ca
set it to make sure the throttle type arrow is pointing up...meaning it should be configured as "voltage goes up whne throttle is pressed" SAFCII has this feature..and Neo must have iet too.