Pressure plate bolt question

[DETONATION666]

2JZ-1JZflywheel-Spec 7MGTEclutch/pp-1JZBH-R154 blah blah useless info

I cant seem to find out which bolts to use for the Pressure plate to flywheel I allready have the ARP's for the flywheel-motor. I would asume 2J bolts? and there are only 6 right? Any place to get them cheaper then my local dealership?

 

[eman2289]

Jeff watson at champion toyota should be able to get you a better price. And as far as I know, you need to use the 2j ones.

 

[tlo86]

everything clutch on is 7M stuff. i used toyotapartscheap.com a lot too but either way they will be base price

 

[DETONATION666]

Yeah my local wanted like 80 beans plus
so use the 7M ones>?

 

[DETONATION666]

I bought the MK3 bolts and they weren't long enough to go through the Spec pressure plate. I then got MK4 bolts and they "to me" looked identicle in length. I emailed Driftmotion about them and they said they had them for sale on the site but they dont and they havent gotten back to me. Im pretty pissed I wanted to get the tranny attached to the motor during the weekend but no such luck

 

[mobes]

I show 90119-08302 for the JZA70, while the MA70 is 90119-08322. Not sure why the difference, maybe the JZA70 ones are in fact longer. I would think they'd be the same. Is the SPEC pressure plate really that thick?

 

[IJ.]

Take a bolt to your local bolt specialist and say "I want some like this but x-mm longer please and Grade 8 or better.

Probably cost $10 and you're set for the trans install.

The PP bolts are as highly stressed as you'd think but still need to be decent quality.

 

[tissimo]

7m bolts work. I've used them several times now.

 

[GrimJack]

I bought the MK3 bolts and they weren't long enough to go through the Spec pressure plate. I then got MK4 bolts and they "to me" looked identicle in length. I emailed Driftmotion about them and they said they had them for sale on the site but they dont and they havent gotten back to me. Im pretty pissed I wanted to get the tranny attached to the motor during the weekend but no such luck

Errr... it's a well documented fact that the SPEC pressure plate (at least for stage 1, 2, or 3) *is* a Toyota PP that's been painted blue. Hell, it still says Toyota on the casting!

Is the pressure plate properly aligned and on the dowel pins?

 

[DETONATION666]

I beleive you I'm sure the 7M's would work fine Its got to be Toyota they wont admit when they are in the wrong and once I take things out of the bag I cant return them.
It wouldnt be the 1st or 10th time this dealership has messed my Sh*t up
It does have toyota in the casting so Im sure its the right one.

 

[DETONATION666]

Ill have to use your numbers and order them from a different dealership

Errr... it's a well documented fact that the SPEC pressure plate (at least for stage 1, 2, or 3) *is* a Toyota PP that's been painted blue. Hell, it still says Toyota on the casting!

Is the pressure plate properly aligned and on the dowel pins?

I show 90119-08302 for the JZA70, while the MA70 is 90119-08322. Not sure why the difference, maybe the JZA70 ones are in fact longer. I would think they'd be the same. Is the SPEC pressure plate really that thick?

 

[DETONATION666]

The only ones Ive found so far are too long and are like grade 5's

Ill Keep looking for a fastener place around my area....LI sucks

Take a bolt to your local bolt specialist and say "I want some like this but x-mm longer please and Grade 8 or better.

Probably cost $10 and you're set for the trans install.

The PP bolts are as highly stressed as you'd think but still need to be decent quality.

 

[tissimo]

I beleive you I'm sure the 7M's would work fine Its got to be Toyota they wont admit when they are in the wrong and once I take things out of the bag I cant return them.
It wouldnt be the 1st or 10th time this dealership has messed my Sh*t up
It does have toyota in the casting so Im sure its the right one.

those are not the right bolts.

Ace hardware has a metric section. At least all of em if FL do. Did you ask one of the people that work there?

 

[DETONATION666]

I posted this on Supraforums before

Ive allready gone to:
Westbury Toyota x2
Ace Hardware x3
Home Deepthroat x2
Lowes x1
S-K sped x 1

 

[IJ.]

They're GE PP bolts.

 

[GrimJack]

Yup... looks like they gave you part # 90119-08026 for the W58, when you wanted part # 90119-08322 for the R154.

90119-08322 is about twice as long.

 

[DETONATION666]

Thanks for the numbers guys Ill see if i can get the retards to order the right Sh*t this time
I spoke with a parts guy just now and he said what is listed in their computer is 90119-08026 so I told him I wanted 6 of the
08322's

 

[GrimJack]

He is looking at the wrong page. He is looking at this page:

http://www.cygnusx1.net/Supra/Library/EPC/291420/catalog.aspx?F=3101&P=1

And he SHOULD be looking at THIS page:

http://www.cygnusx1.net/Supra/Library/EPC/291420/catalog.aspx?F=3101&P=2

Leads me to believe that he's just not that bright.

 

[DETONATION666]

Got the right bolts and now the motor and tranny are in the car Your the shit Grim

 

[IJ.]

They're GE PP bolts.

So that makes me slightly less the shit?