Precision turbo and supporting mod questions

[vpr131]

Hey guys,
Ive been looking at the 6262 precision turbo and I was wondering what supporting mods would be needed for this upgrade. I already have 3'' exhaust, a 255 walbro, 550 injectors, lexus afm, and rebuilt engine with .040 pistons and arp studs. I was also wondering if the HKS FCON piggyback that I use right now would be sufficient or if i should go with a stand alone. Thanks

 

[mk3-4-me]

you dont need a standalone for a turbo. i had my precision 6152 on my stock ecu for a bit, then i went to maft basic and tuned it on that. you weill be fine. tuning devices are to control the injectors/tming/knock and all that "electronic" stuff.

Great choice on turbo though, i love Precision turboes. You wont be dissapointed!

 

[vpr131]

I hope so! how much power were you making with the 6152?

 

[mk3-4-me]

i made 391 rwhp at only 15 psi. These things push massive amounts of air at a lower psi. My AFRs were at 11.6 to. full boost by 4ish K. My tires kept cooking as soon as the turbo hit 10 psi. Just cooked them in 2nd and 3rd if i let them. lol

I bought a 6766 for my build this year.