Polyurethane subframe bushings for the MA70 Supra

[ronniek]

guys,
here is photo of full rear subframe bushings kit.
Ronnie

 

[MidShipCivic]

Putting to stop to rear end dancing around on ya 1 subframe at a time.

 

[ronniek]

I have also noticed that the inner diameter of the stock inner steel sleeves is 17mm,but the subframe bolts are 14mm diameter.
Ronnie

 

[927mgtepat]

IM IN!!!!!!!!!!!!

 

[GeneStarWindGSW]

better handling and nicer rides?? put me in =D

 

[ronniek]

BTW the bushings are 90 rockwell hardness,I can go 1 step harder to 100 rockwell if anyone is interested.

Ronnie.

 

[GeneStarWindGSW]

how much is the difference?? ahhh why not =)

BTW the bushings are 90 rockwell hardness,I can go 1 step harder to 100 rockwell if anyone is interested.

Ronnie.

 

[Asterix]

90A is good for me.

Asterix

 

[927mgtepat]

Price????

 

[ronniek]

$220.00us,shipping is usually $50.00u.s to US.A
The 90A shore hardness(sorry not rockwell hardness) is hard as tap washer.
There is shore D hardness which is harder.70D probably as hard as golf ball and even harder suff like 80D which is hard as bone.
Ronnie

Price????

 

[MidShipCivic]

You wouldnt want a subframe bushing hard as hell you'd start to feel the rear end in the car and in the case of an impact with the rear wheel / diff. you might not like what happens after some nasty tears that is of the cars frame.

Anyone get the saying a part is only as strong as it's weakest joint ?

 

[ronniek]

Correct.90a shore hardness is just right for bushings

You wouldnt want a subframe bushing hard as hell you'd start to feel the rear end in the car and in the case of an impact with the rear wheel / diff. you might not like what happens after some nasty tears that is of the cars frame.

Anyone get the saying a part is only as strong as it's weakest joint ?

 

[MK3_300]

Do you have any pics of the front subframe bushings?

Also, What is the price on the front bushings?

 

[Supra Sam]

Can someone who has installed these give a quick run down on how they feel, I'm more so concerned with the noise.

It seems the BIC aluminium ones were pretty noisy.. well according to BIC himself it amplifies any existing drive train noises. ie noisy diff

Cheers
Sam

 

[Supra Sam]

Anyone?

 

[ronniek]

I will post photos of front subframe bushings.
The poly bushings would be as noisy as Bic spacers.
I go make softer grades of the subframe bushings if requested

 

[ronniek]

These bushings will fit 88 supra.
Here is photo of poly front subframe bushing with stock inner steel sleeve.A new steel sleeve is also included with the poly bushings.

 

[tsuper92]

i'm very happy with ronnie's product's and communication(awesome guy).the rears subframe bushing are easy to hammer out and install the new one's.i don't have any driving impression's yet,but i'm also doing alot of other suspension mod's at the same time.i don't think i could give an honest opinion on additional noise renosance.i have a pic of them un-installed and the frame with the old shit removed.

 

[Piratetip]

Thats a nice set of parts.

 

[Supra Sam]

Can anyone tell me who makes those suspension arms ?

Sam