Plug in head. Toyota said they can't get it.

[mercuryfreak200]

So it the hex plug that holds the sprkplug cover on and blocks the oil I called toyota and the guy got real confused, so I went there and pointed it out and he said they can't get that part. anyways it the round hex plug behind the number six plug does anybody know where they might have it,or am I sunk and need to buy a bolt.?

 

[Dirgle]

90341-24008 Plug, W/Head Straight Screw #3

Take that part number in to your Toyota dealer, or call Champion Toyota.

 

[GrimJack]

call Champion Toyota.

I call BS on your local dealer. If the part is seriously discontinued, come back and someone on here will dig one out of the bits bin for you. I think I've probably got one somewhere in the shop.

 

[hvyman]

Expensive but well worth getting is a 14mm allan socket from snapon. I think mine was like 36 bucks. But totally worth it even if i only use it once in a while.

 

[giterboosted]

Autozone sells a set of three Allen sockets that has it in them for like ten bucks, that's what I use

 

[CyFi6]

short 14mm bolt with a 14mm nut jammed tight works just fine for me!

 

[87M-GTE]

I have some extra plugs if you need.
I got my allen wrech at a local hardware store IIRC it was under $15

Sam

 

[stevenr816]

http://www.cygnusx1.net/Supra/Library/EPC/291410/catalog.aspx?F=1104&P=1

 

[suprajim54]

My local NAPA store had a 14mm allen wrench on the shelf for about $10. What is the purpose of the screw/bolt in this plug? I have the plug, but the bolt is missing, is it anything that I need to worry about?

 

[CyFi6]

the rearmost allen plug has a bolt hole in it for a bracket that supports the heater hose. Not a huge deal if its missing.

 

[stevenr816]

the rearmost allen plug has a bolt hole in it for a bracket that supports the heater hose. Not a huge deal if its missing.

its not a threw hole so like cyrus said it doesnt matter if its not there.

 

[mercuryfreak200]

I have some extra plugs if you need.
I got my allen wrech at a local hardware store IIRC it was under $15

Tht'd be cool if you could I'd apreciate it very much.

 

[IwantMKIII]

Expensive but well worth getting is a 14mm allan socket from snapon. I think mine was like 36 bucks. But totally worth it even if i only use it once in a while.

I got mine for $4.58 shipped to my door in two days, may want to shop around next time

 

[Canuckrz]

Part number 90341-24008 is still available. Your local dealer is either lazy or doesn't want to be bothered, I'd take your business elsewhere imo.

 

[mercuryfreak200]

Yeah I got it today from them cost me $8.26 with tax. Got the car all put back together and the number 6 spark plug wire broke lol got a used one from my mechanic till I can afford a set of new ones, runs even better now that wire is fixed it had a little miss to but now its totally gone yea.