Pics of your relocated Power Steering Reservoir

[CajunKenny]

I'm looking to see what you guys and gals have done here.

Room is becoming more of a comodity under my hood. I'm almost ready to replace my 20g with my SP61GT and will probably need to relocate my power steering res.

Just looking for ideas...

Thanks!

 

[hvyman]

n/a power steering res.

 

[GC89]

Check my build ken, better than NA res IMO

 

[CajunKenny]

What'd you do Ryan...cut and re-bend the factory brackets?

Are there times when you regret putting it that close to the CPS?

 

[pln]

here is a pic of my re-location

 

[tsuper92]

i relocated my nephew's near the radiator

 

[Zumtizzle]

^Thats Pretty Badass!

 

[martin p]

you can just about see my pas res up near my brake master cylinder, It was meant to be a temp location But i like it there.

 

[IJ.]

 

[Moy]

Ian, you don't count, your not part of the 7M group anymore lol

 

[dumbo]

Not the prettiest but works good.

 

[adampecush]

dumbo, please replace that stainless braided line from the FPR to the rail with a non-stainless line (nylon braid or pushlock). Hate to see another car burn from the FPR line wearing through the 12V alternator wire.

 

[GC89]

That was the first attemp and I never ran it that way and am sure I would have regretted it.

Heres where I ended up moving it too.

Lots of room now

being post 90 you have the ps cooler though. I removed my unit and replaced it with the factory oil cooler. I would recommend getting one from the junkyard. Ford explorers and a few others use a nice plate type thats easy to find, Ill probably do the same next time around.

 

[dumbo]

dumbo, please replace that stainless braided line from the FPR to the rail with a non-stainless line (nylon braid or pushlock). Hate to see another car burn from the FPR line wearing through the 12V alternator wire.

Have no fear I keep an eye on it, and when it's a daily it will be changed/fixed. Thanks for the keen eye though:icon_cool

 

[sethron71]

Seth

 

[IJ.]

Ian, you don't count, your not part of the 7M group anymore lol

At least mine ran

 

[tlo86]

At least mine ran

Lol.

i used my 7mgte on my 2jz, and used a camry one on a sc300's 2jzgte.
those afterarket ones, are they custom built by you or buy thm somewhere? w/ a screen?

 

[SURUKO]

not finish picture but is with an n/a reservoir

 

[kamikazemkiii]

just take it off who needs it anyways?
i kid i kid

 

[dbsupra90]

why not get one of the aluminum ones? you can get a pretty decent looking one for $30 or so. the n/a is a cheap solution, just think they are a tad fugly.