Pics of YOUR Aftermarket steering wheels

trdmk3supra

LVNBSTLFE
Mar 31, 2005
207
0
0
44
Summerville, South Carolina
here is a pic of one of the two of mine. the one in the pic is the bride ebay one. no pic of the torino which came with the car but i like the torino one more though. i paid 40 for the bride one!!
 

Attachments

  • car pics 049.jpg
    car pics 049.jpg
    86.3 KB · Views: 101

GotToyota?

Dedicated Member
Apr 6, 2005
1,639
0
0
35
Texas Motor Speedway
I have a stock wheel, but if I had to have an aftermarket wheel, I'd have something like Catbacks (hope he doesn't mind me posting his pic).

img00067aj.jpg
 

tekdeus

Pronounced Tek-DAY-us
Jan 23, 2006
2,115
0
0
Vancouver Canada
www.bitrontech.com
Hard to explain, but here goes: You can see in my photo that I had to use a dremel to cut a plastic ring out of the stock rear steering wheel cover, which has the 3 holes that lock on and turn the turn signal cancelling peice on the steering column. I had to trim the heck out of it and even shave it down quite thin. It had 3 small inner tabs that seemed to line up with the momo hub, but it still required hot glue to get it solid.

For the horn I used the stock black ring with the wire plug. I took it off, cut off the wire plug, and figured out which of the 3 wires was the horn. I then dremeled out a slot so that I could bend up one of 2 the wire tabs through the slot so it would contact the brass area on the momo hub. A fair amount of time and patience with a dremel was totally worth it in the end.

chedderknight said:
what did you have to do to get the horn working?I"m in the process of trying to figure it out
 

willfish

been here since 2003
Apr 23, 2005
648
0
16
50
Pittsburgh, Pa.
tekdeus said:
I posted this a couple of weeks ago. It was a bitch to get the turn signals working like stock; the horn too.

Momo Jet, 350mm - ideal size
Untitled-7.jpg

Untitled-8.jpg

Untitled-9.jpg

Untitled-2.jpg



fine ass wheel !!!!
I like it , it would match the carbon pedals, e-brake, shifter,,,,,,,

my only draw back, is that I still want a airbag !!!!!!!


Will
 

fiyota

I ♥ Boost
May 3, 2006
1,063
0
0
Kelowna, BC
just installed one of these today... I'll take some pictures tomorrow... paid $300 w/ install kit (canadian)..
 

Attachments

  • B000A8FHCI.01-A1MK3HAFHEKCQU._SS500_SCLZZZZZZZ_V54738273_.jpg
    B000A8FHCI.01-A1MK3HAFHEKCQU._SS500_SCLZZZZZZZ_V54738273_.jpg
    23.5 KB · Views: 31