PIC AND SPEC REQUEST: 91-92 Owners Toyota Nose Badge

[Idealsupra]

Hey guys im looking for a good pic of the toyota nose badge. dead on. as well as the spec of it. height, length, etc...

if you REALLY want to help... and have some time if you could measure the width of all the ovals and all the spacing... IE: take pic... and label the sizes of all lines and spaces... i wish i had one here but i dont

thanks!

(if anyone does the full out request.....they will receive compensation...what it is i cant say yet but i have a feeling youll like it )

 

[MKIIINA]

brb jayson.... you better be happy you have me for a friend!

f^%& its cold! was freaking 75 yesterday, today is 35 and rainy! great texas weather....

width - 3in even
hieght - 2 & 9/16ths
inner oval - call it 1/2 in
ill get the pics up here in a sec

 

[americanjebus]

I messed up on the measurements, ignore the MM and put in CM.
The black lines arent exact, all measurements are to the outer edges of each oval. so the 1.9 is the width of oval from both outermost edges.

anyway here are two pics

-Luis

 

[supra90turbo]

specs to the max, Luis!

 

[Idealsupra]

damn thanks luis.... thats almost exactly what i wanted...whats the 6cm?

also if you or anyone else would do this... could get me measurements of the width of the lines used to make each oval... that would be PERFECT.

thanks again!!

and joe...ill take yours too so i can compare and contrast and im still in need of a few measurements

 

[MKIIINA]

heres some pics of mine

 

[americanjebus]

damn thanks luis.... thats almost exactly what i wanted...whats the 6cm?

also if you or anyone else would do this... could get me measurements of the width of the lines used to make each oval... that would be PERFECT.

the 6cm with the line is the overall height of the emblem from both tob and bottom edges, the 2nd 6cm is the width of the top oval from its outermost sides.

i was measuring the thickness' but it changes allot, the main oval was like .25cm-.3cm because it thins out towards the top a little.

 

[Idealsupra]

the 6cm with the line is the overall height of the emblem from both tob and bottom edges, the 2nd 6cm is the width of the top oval from its outermost sides.

i was measuring the thickness' but it changes allot, the main oval was like .25cm-.3cm because it thins out towards the top a little.

does it actually thin out on the top or does it seem that way because the other oval connects into it?

would you say .3cm is a fair width overall for the outer oval?

also the other oval widths are they the same? if not any chance for a measurement on those?

thanks a ton! i wish i had a badge here to do this myself it would be easier but i definitely appreciate the help!

 

[MKIIINA]

heres another picture of the widths. mspaint ftw!

heights are ~2/32nds at the edges and 4/32nds in the center

 

[americanjebus]

heres another picture of the widths. mspaint ftw!

heights are ~2/32nds at the edges and 4/32nds in the center

wut he said
in metric the red lines are .3cm
The black ones are two different sizes the top is .6cm and the bottom is 1cm
The green came out to .3 cm
and the light blu was .6 in the middle and .5cm towards the outer edges

and yes the outer edge thins out to .25cm when it comes in contact with the uppermost oval.

If you dont mind me asking... wut are you up to?

 

[MKIIINA]

nothing absolutely nothing. jayson just likes asking random annoying questions to keep me from getting my final paper done!

 

[Yellow 13]

Pre-91 badges FTW.

 

[MKIIINA]

for key chains!

 

[JMDigital]

I have these logos in vector format if they will help. Vectors can be loaded into CAD software. Let me know if you want any of these for your project, whatever it is.

 

[chriso]

Well....what did they win?

 

[Nick M]

 

[EdgeSupra]

*wondering what Ideal is up to*....

 

[Idealsupra]

*wondering what Ideal is up to*....

well ideal is up to bitching out gateway.... my fucking computer took a dirt nap last night RIGHT when i was about to finish up what i was working on..... ive only had the thing for like 8-9 months...

so 70 dollars later a new hard drive is on its way and until then my project is put on hold.... took me about 3 hours to get it just right where i wanted it to..... i was gonna show the world! but nooooooo

now i have to start all over again and not until me new hard drive gets here either.

gateway laptops FTMFL :icon_evil


thanks to all those who have helped! ive got the info i needed and once i get my dead comp situated ill post up what im doing

 

[KeithH]

Don't blame gateway. Those laptop HDs are just walking time-bombs. I went through about 4 drives on my Dell before I gave up and went back to a full desktop for my daily use. I am hoping that now that I don't use my laptop every day that it will last longer - the new desktop is MUCH more powerful anyway.

Sorry to hear about your loss.

 

[MKIIINA]

mhe i wouldnt blame the laptop or gateway or dell.

scratch that i do blame dell. i went through 3 hdd's on my desktop before dell finially listened to me and sent me a western digital hd (this was 3 hds in about a year) been running fine since. maxtor and fujistu hds ftw