:1zhelp:
Well, on my quest to get a z06 I need to slim down my cars. I was hoping to get a nice sized down payment to put towards the car, but I was adding how much I need to spend to finish my 1.5 car and its quite a bit. so less down
I still need LOTs of parts to get it running. Then the exterior is shot so itll need paint. I'm looking at ~ 4k.. probably more.
After its finished I was planning to sell for like 10k. So thats 6k I'd make minus the 4 i put into it. I'm not sure if Ican get 6k parting out the peices I got, but would also save probably 100 hours of work on the car.
I need..
1j bellhoungs, clutch, timing belts & tensoner, waterpump, Misc Gaskets, arp head studs, a clutch, Oil lines for the single, Make the exhuast (still need ~200 in parts for it), bov.. I'm sure theres more..
What the car is a lower milage (103K) 91 blue w/ nice blue cloth interior, exterior is gone, a few rust spots that'll be $$ to fix.. otherwise is pretty straight.. I have a 2jz tt block, 1jz head, intake manifold, Greddy manifold, greddy type r wastegate, ITS t67 turbo, mkiv 550s, aristo harness and ecu (not wired yet) 4" exhaust parts, afc, avcr, greddy gauges, apexi tt, 18x8.5 & 18x10 wheels.. etc..
Maybe sell as an unfinished project? but not sure how much I can get? I'd hope for 5, but thats very optimistic...
Here is an old pic of the car, shows the piss poor exterior condition.. Clear is pealing all over it.. shitty paintjob ftl
I'm not sure what to do. The mk3 market isn't that great so will take time to sell (i'm figure 6-10 months at my asking price), but at least make some $ back. If I part out I'll lose some money probably, but save agrivation. Thats if I can sell all the parts.. Not sure what to do.
I dont have that much flex money right now, only ~ 500 a month disposable income, so would take almost 8+ months to just get the money to finish everything....
Well, on my quest to get a z06 I need to slim down my cars. I was hoping to get a nice sized down payment to put towards the car, but I was adding how much I need to spend to finish my 1.5 car and its quite a bit. so less down
I still need LOTs of parts to get it running. Then the exterior is shot so itll need paint. I'm looking at ~ 4k.. probably more.
After its finished I was planning to sell for like 10k. So thats 6k I'd make minus the 4 i put into it. I'm not sure if Ican get 6k parting out the peices I got, but would also save probably 100 hours of work on the car.
I need..
1j bellhoungs, clutch, timing belts & tensoner, waterpump, Misc Gaskets, arp head studs, a clutch, Oil lines for the single, Make the exhuast (still need ~200 in parts for it), bov.. I'm sure theres more..
What the car is a lower milage (103K) 91 blue w/ nice blue cloth interior, exterior is gone, a few rust spots that'll be $$ to fix.. otherwise is pretty straight.. I have a 2jz tt block, 1jz head, intake manifold, Greddy manifold, greddy type r wastegate, ITS t67 turbo, mkiv 550s, aristo harness and ecu (not wired yet) 4" exhaust parts, afc, avcr, greddy gauges, apexi tt, 18x8.5 & 18x10 wheels.. etc..
Maybe sell as an unfinished project? but not sure how much I can get? I'd hope for 5, but thats very optimistic...
Here is an old pic of the car, shows the piss poor exterior condition.. Clear is pealing all over it.. shitty paintjob ftl
I'm not sure what to do. The mk3 market isn't that great so will take time to sell (i'm figure 6-10 months at my asking price), but at least make some $ back. If I part out I'll lose some money probably, but save agrivation. Thats if I can sell all the parts.. Not sure what to do.
I dont have that much flex money right now, only ~ 500 a month disposable income, so would take almost 8+ months to just get the money to finish everything....