Os Giken Push pull converter thrust bearing replacement?

[paradox616]

Hi Guys,

So i picked up a os giken push pull converter for my R154 gearbox, the thrust (release/throwout) bearing was shagged, i got a clutch shop to replace it. the one they used was a larger profile (in depth) and as a result when bolted up the thrust bearing pressed on the clutch fins partially releasing the clutch.

So i pulled the gearbox out and have been trying to find a suitable replacement that is the correct profile, I've done a bit of searching with no results. surely someone has replaced this part before.

Does anyone know what the bearing is from/have a part number for it?

You can see it below, its for this style movement converter.

Thanks.

 

[paradox616]

found a release bearing to fit, incase anyone else wants to know it was a

Part No. BRG2149 - TK40-14 MAZDA/TOYOTA/MITS

 

[Inygknok]

Have you tried it out yet? I'm interested in knowing if it's actually functional and how much it can handle. I should use the search function........

 

[ricoboost]

and how do you adjuste the bearing after? i have a used clutch with the push/pull converter and i dont know how close to the pressure plate it should be thanks