Oil cooler placement with AC?

[eraezer]

ok, is 19 mm the thickness of the coolers that you used?

 

[IJ.]

ok, is 19 mm the thickness of the coolers that you used?

That was their thickest point at the clamps the coolers were I think from memory 17mm.

 

[nctexan]

What is a good AM oil cooler to use with a stock 1JZ?

What about this kit?
http://www.autozone.com/autozone/pa...mString=search&itemIdentifier=538984_12018_0_

 

[CyFi6]

There is about 2 inches between the condenser and radiator, i had a 2.5" thick fan i tried to fit in there, and it just barely wouldnt fit.

 

[D.J.T.]

Hello, could you please post a picture of where the stock oil cooler would normally be mounted? I bought a Turbo MKIII but it was capped from the oil lines & the turbine was gone in the turbo so technically it was non turbo with a turbo manifold & the turbo housing & well idk where to find the oil cooler in.

 

[eraezer]

Gota7MGTE, mine is directly in front of the IC.

 

[Poodles]

Stock, it's mounted right beside the intercooler.

 

[Compton74]

i actually have a pretty intense setup, with a oil filter relocation kit and a mesa cooler for the oil, and one for the tranny, mounthing is right in front of the intercooler and looks pretty decent ill post some pics up when i get some time

 

[D.J.T.]

Gota7MGTE, mine is directly in front of the IC.

Thank you. i found the bracket just bolted there without the oil rcooler...

 

[D.J.T.]

Stock, it's mounted right beside the intercooler.

I look in TRSM & theres a BIG oil cooler next to the small one. :runaway: Do i need this OTHER oil cooler? (R154 M/T by the way)

Here's the link

http://www.turboninjas.com/mk3supra/1987/06-LubricationSystem.pdf

 

[Poodles]

ignore those

 

[mecevans]

Anyone put theres under the headlights?

 

[Moy]

Anyone put theres under the headlights?

Yessir. Kinda "ghetto-rigged" to hold it in place, but it's under there.