Ok so I'm currently breaking in my built 7M and its on a diet of straight 30W ran Rotella T1 for approx 500miles now its running Castrol HD30 until approx 1000miles where I plan to switch to a conventional 5W-30. The oil pump has been shimmed approx 3.5mm and it has a full flow oil cooler setup running a 12 row cooler -10 all the way. I can buy Redline oil locally as well as Eneos and Rotella T6. GC I can no longer find without ordering. My question is with my setup once I'm ready to switch to a synthetic will Redlines 40W oils be too thick? T6 is around 13.6cst and Eneos 5W40 as well. GC was 12.1cst IIRC. Redlines 40W oils are in the 15cst range. Their 5W30 and 0W30 are 11.9 and 11.7 respectively. Basically what viscosity range should I keep within if my choices were Redline, Rotella or Eneos.
Thanks
~JDMMA70
Also to add my turbo is only oil cooled (TD06-20G) If that affects anything.
Thanks
~JDMMA70
Also to add my turbo is only oil cooled (TD06-20G) If that affects anything.