Official Masterpower dyno results thread!
- Thread starter ModularTurbo
- Start date
jesus i know you are all waiting on me 
im working on it, im still taking donations btw. oh rob btw still working on getting that damn wastegate to mate up with the manifold, messed it up the 1st time so having to go to plan B
im working on it, im still taking donations btw. oh rob btw still working on getting that damn wastegate to mate up with the manifold, messed it up the 1st time so having to go to plan B
2jz-ge-t
w58 with 6 puck clutch
9psi
masterpower t70
stock fuel stock 310cc injectors
made 312-315 rwhp and 285 rwtq did like 15 dyno pulls
long story blew the motor now dude is using a 1jz with the same turbo kid different ebay manifold for the 1jz but id say its making low 300rwhp and about 250rwtq
2jz-gte
w58 with ceramic soild disk clutch
masterpower t70
12psi
stock fuel stock injectors
made 357 and 330 rwtq dyno'd just once.
b18c1 with built motor
master power t70
33-35psi made 550 fwhp and low 300s fwtq lasted 3 weeks before the bearing failed and the impeller killed itself on the compressor housing.
w58 with 6 puck clutch
9psi
masterpower t70
stock fuel stock 310cc injectors
made 312-315 rwhp and 285 rwtq did like 15 dyno pulls
long story blew the motor now dude is using a 1jz with the same turbo kid different ebay manifold for the 1jz but id say its making low 300rwhp and about 250rwtq
2jz-gte
w58 with ceramic soild disk clutch
masterpower t70
12psi
stock fuel stock injectors
made 357 and 330 rwtq dyno'd just once.
b18c1 with built motor
master power t70
33-35psi made 550 fwhp and low 300s fwtq lasted 3 weeks before the bearing failed and the impeller killed itself on the compressor housing.
Sf member c/p
Master power T70
94 6speed, Master Power T-70, Hybrid 3 row IC, BL fuel system with 75lb injectors, ebay manafold, ebay wastegate, Tial BOV, 3" ebay downpipe, manual boost controller. Temperature was in the 90's and humid. Results are below.been running 18psi for several months. This run was at 32psi.backed it down to 28psi and still made 650rwhp.
Master power T70
94 6speed, Master Power T-70, Hybrid 3 row IC, BL fuel system with 75lb injectors, ebay manafold, ebay wastegate, Tial BOV, 3" ebay downpipe, manual boost controller. Temperature was in the 90's and humid. Results are below.been running 18psi for several months. This run was at 32psi.backed it down to 28psi and still made 650rwhp.
Since one of our members rarely gets on the site...
2JZ-GE(T)
1987 MA71
R154 5 Speed
MP T-70
677RWHP @ 28PSI
580RWTQ (I believe)?
Jeff
2JZ-GE(T)
1987 MA71
R154 5 Speed
MP T-70
677RWHP @ 28PSI
580RWTQ (I believe)?
Jeff
Andre;1337340 said:Sf member c/p
Master power T70
94 6speed, Master Power T-70, Hybrid 3 row IC, BL fuel system with 75lb injectors, ebay manafold, ebay wastegate, Tial BOV, 3" ebay downpipe, manual boost controller. Temperature was in the 90's and humid. Results are below.been running 18psi for several months. This run was at 32psi.backed it down to 28psi and still made 650rwhp.
those af ratios are scary lean at full tilt after 5000 rpms!
awesome, do you have a dyno sheet we can see?
I would like to see the power curve.
Also was it a .68 or a .96 a/r housing?
I would like to see the power curve.
Also was it a .68 or a .96 a/r housing?
A+
Very nice.
Very nice.
Andre;1337340 said:Sf member c/p
Master power T70
94 6speed, Master Power T-70, Hybrid 3 row IC, BL fuel system with 75lb injectors, ebay manafold, ebay wastegate, Tial BOV, 3" ebay downpipe, manual boost controller. Temperature was in the 90's and humid. Results are below.been running 18psi for several months. This run was at 32psi.backed it down to 28psi and still made 650rwhp.
Boost Lee;1338115 said:Since one of our members rarely gets on the site...
2JZ-GE(T)
1987 MA71
R154 5 Speed
MP T-70
677RWHP @ 28PSI
580RWTQ (I believe)?
Jeff
Yup. Stinger EMS 50/50 110/93 mix & methanol. Drop in top end caused by restrictive .68 hotside, and 3" exhaust.
We should have some more guys coming in soon I sold a couple more of these on the board in the last 2 weeks.