OBX cam gears
- Thread starter redmk3
- Start date
I had a honda guy tell me once that adjustable cam gears are nothing more than a good way to bend your valves...
...granted we don't have interference motors, but still makes sense.
Unless you're buying a muffler or something along those lines, OBX is garbage.
...granted we don't have interference motors, but still makes sense.
Unless you're buying a muffler or something along those lines, OBX is garbage.
damn man if you don't want to use the search feature at least check NEW POSTS.
I am not trying to be a prick but there is a thread on this that just started
here is the link
http://www.supramania.com/forums/showthread.php?t=68636
I am not trying to be a prick but there is a thread on this that just started
here is the link
http://www.supramania.com/forums/showthread.php?t=68636
Last edited:
meh, he's only got seven posts, give him a break.
...although the search function is a good thing to use.
iirc, I'm pretty sure that the 2jz adjustable cam gears will bolt up to the 7m, but I'm not positive. Do a search and see what you dig up.
...although the search function is a good thing to use.
iirc, I'm pretty sure that the 2jz adjustable cam gears will bolt up to the 7m, but I'm not positive. Do a search and see what you dig up.
SupraSportJack;980433 said:
I'm confused. That link is to the OBX crank pulley, not the OBX cam gears.
What's wrong with the OBX cam gears?
Doward;980578 said:
there really are other threads about them too hehe
http://www.supramania.com/forums/showthread.php?t=68783
Doward;980578 said:
They're made by OBX. One guy had issues with them breaking the dowel pin that goes into the cams, or grooving the cam gears or something due to the inferior aluminum that they are constructed of.
Something like that.
tlo86;980595 said:
There we go. Now when someone searches, comes up with this thread, they will get pointed to the right place, rather than hearsay!
mine work fine but were made for 2jz thus why they don't work
but me being me i made them work and they work fine buy me if it has 5 bolts holding it and the old school ones had 3 pinches i think there fine
as in the aulimn it fine nothign wroug with it never bent or flaten
i still have the spacers so you can run any 2 jz cam gear on a 7m hit me up oif any one wants them
but me being me i made them work and they work fine buy me if it has 5 bolts holding it and the old school ones had 3 pinches i think there fine
as in the aulimn it fine nothign wroug with it never bent or flaten
i still have the spacers so you can run any 2 jz cam gear on a 7m hit me up oif any one wants them
OK I found a set for you. Fiadanza makes Cams gears for the 7mgte. The are much cheaper than AEM and Much better than OBX.
Oh yea I now stock Fidanza along with AEM
Jack
Oh yea I now stock Fidanza along with AEM
Jack
Doward;980578 said:
edit: nevermind, my opinion is expressed in the link a few posts above along with a vid.