I was doing some maintenance on the supra yesterday, and doing the SeaFoam was one of them. After I ran the SeaFoam, I let it sit for a few minutes and then restarted it as it says to do. Then later on I went for a drive, got to my destination about 10 minutes from home, sat there for about half and hour, and then tried to leave. It would turn over, but would not fire completely. I finally got it to start by holding down the skinny pedal for a few seconds, before trying to turn it over. And after a few tries it finally started.
Drove it home, rove just fine, although the water-pump light came on and went away twice while driving. I get home, shut it off, and same thing, no start. So its been sitting in the street since then.
Any help or things I need to look for? As for the maintenance i did yesterday, flushed the coolant, SeaFoam, charged a/c(that things works great now :naughty: ), and replaced the plug wire that goes from the ignitor to the distributor till i can get the rest of the gaskets to do the plugs and valve cover gasket.
Drove it home, rove just fine, although the water-pump light came on and went away twice while driving. I get home, shut it off, and same thing, no start. So its been sitting in the street since then.
Any help or things I need to look for? As for the maintenance i did yesterday, flushed the coolant, SeaFoam, charged a/c(that things works great now :naughty: ), and replaced the plug wire that goes from the ignitor to the distributor till i can get the rest of the gaskets to do the plugs and valve cover gasket.
