no oil pressure on fresh rebuild.....!UPDATED...AGAIN...with pics!

[dumbo]

NOT PREGNANT!!!!!!!!!!!!

:evil2:

GO BUY A LOTTERY TICKET!!!!!

Cars doing whats it supposed to, TOO!

...but you don't need thread sealant on your turbo feed line.

also maybe I missed it, but what was the problem?

 

[the t3d]

haha. if you're talking about why no oil pressure, then it was the relocation kit lines were switched and it was too much of a PIIA, so i just fuck it, and put the stock filter on and bam!

-t3d

 

[supraguy@aol]

LISTEN VERY CAREFULLY!!!!

DO NOT LET THAT AFPR LINE GO ANYWHERE NEAR THAT EXPOSED ALTERNATOR WIRE!!!
That is a positive lead, and guess what- Your AFPR line is grounded.
Wanna see you new engine melt down in a hurry?

 

[92nsx]

^^ Nice catch, I didnt even look at that.

t3d-- glad to hear everthing is all good once again. You didnt want the oil filter mounted there any ways, it would have made a huge mess when changing and covered your DP with oil.

 

[the t3d]

LISTEN VERY CAREFULLY!!!!

DO NOT LET THAT AFPR LINE GO ANYWHERE NEAR THAT EXPOSED ALTERNATOR WIRE!!!
That is a positive lead, and guess what- Your AFPR line is grounded.
Wanna see you new engine melt down in a hurry?

damn. i didn't even think of that. i'll have to re-arrange some things then.


thanks!

 

[the t3d]

^^ Nice catch, I didnt even look at that.

t3d-- glad to hear everthing is all good once again. You didnt want the oil filter mounted there any ways, it would have made a huge mess when changing and covered your DP with oil.

haha yea thanks man. i'm really happy now. i wasn't planning on making that location permanent anyway. doesn't matter now haha

now i gotta wait on these damn intercooler pipes:cry:

-t3d

 

[JimR]

There should be a little plastic cover for that alternator terminal. It's hard grey plastic. You can see it in this pic of my engine... and the alternative routing for your AFPR line too! lol

 

[the t3d]

thanks, but where could i get one of those? i could probably just cover it with some thing nice =0)

-t3d

 

[JimR]

I looked all over the EPC for that part... no luck yet. Your best bets are the junkyard or a parts car.

 

[the t3d]

i think it's time to do a junk yard visit. i love going to the junk yard =0)

-t3d

 

[williamb82]

i figured the lines were backwards. lol. sorry i didnt get to come by, been busy and side tracked. lol.

 

[the t3d]

it's cool man. she's good to go =0)

-t3d