Nice truck. I have been thinking of getting an 83 pick up and putting my 7m into it. so I have a fast little truck to tag along on our long distances drives (500 mile plus)
New member w/ 7mgte swapped 4runner
- Thread starter BoostedRunner87
- Start date
dumbo;1459643 said:Yah you can't clean them with parts cleaner or anthing like that, it ruins themNice looking rig, I'm sure you can find a used one in the FS section to toss on it. Do you have any codes?
Doh missed that CEL section. What code exactly are you getting?
yeah i realize that now! lol but the weird thing is that i did buy an AFM from a guy on this forum, tryed it and i still have the same problem (code 31 and 32) it runs horrible and keeps dying. i cant even drive it because there is absolutely no power. I have tested both AFM's with the ohmmeter and they both test exactly the same. I believe they are good according to the ohm readings. so either i am testing it wrong and i have two bad AFM's or my problem is elsewhere.
Yah I read your other thread, most be in the wiring somewhere. You got good help there so I can't offer any other help man, sorry Good luck keep at her.
Good luck keep at her.dumbo;1460088 said:Yah I read your other thread, most be in the wiring somewhere. You got good help there so I can't offer any other help man, sorry
thanks man! i will get it figured out eventually, its just drivin me crazy right now
Welcome to the supra scene buddy!!!
also ill be pulling those axle shafts for you soon. it's gonna be snowing soon.
also ill be pulling those axle shafts for you soon. it's gonna be snowing soon.
Not a problem Caleb.
and i am just trying to get the engine, front axle and transmission from my 4Runner sold.
I need money for a new 7MGE
and i am just trying to get the engine, front axle and transmission from my 4Runner sold.
I need money for a new 7MGE
THK87;1469303 said:
you need a new 7mge? i thought you were going to rebuild the one you already have?
Welcome! Great ride, I love those old 4runners. Been thinking about trying to get one for my winter ride so I can garage the Supra through the winters.
Relating to the 7M, I stand by this site as possibly the single BEST resource if you can ask a "smart" question. A bunch of the old guys here are a wealth of knowledge and will gladly help out. There are plenty of dumb people and dumb answers, but listen to the wise ones.
This is a great place and a great community.
Relating to the 7M, I stand by this site as possibly the single BEST resource if you can ask a "smart" question. A bunch of the old guys here are a wealth of knowledge and will gladly help out. There are plenty of dumb people and dumb answers, but listen to the wise ones.
This is a great place and a great community.
BoostedRunner87;1469480 said:
it would cost more to rebuild the bottom end, buy a 7mge head and try and replace the top end stuff i dont have... then to buy a new one/imported one.
Yes, engine bay pics. Now. :biglaugh:
I have two 7mge's and a w58 just sitting around... :naughty:
I have two 7mge's and a w58 just sitting around... :naughty:
Nghty89;1469760 said:
yeah i wont be getting any engine bay shots for a bit. its currently outside buried in six inches of snow because i cant get the damn thing fixed! I had to pull it out to work on some other stuff. next time i have it in the garage i will get some pics.
MK3.0dudeman;1469866 said:
yes they are! and thanks, i actually sold those wheels and tires with my last crawler about two weeks ago. I ordered a set of 40x13.50x17 MTRs for the 4runner. they should be here in about a week. I'm excitied to get those put on! i have alot of big plans for that 4runner.
BoostedRunner87;1469615 said:
I should be able to.
I am looking at around $800 for an Imported 7MGE with all the accessories and whatnot with around 40k miles.
Then i gotta pull the head, replace the head gasket, install ARP studs and torque down to 74ft-lbs i think it is.
I will give it a tune up and what not.
I am looking to have around 1200 into the engine.
reason being as to why i dont rebuild the one i have and get a new head?
well im not only missing the cylinder head, but several top end parts.
So to rebuild it and find the parts ill need... i will be paying A LOT more.
anyways, sorry to thread jack ya Caleb.
Now I hope you can figure out your 7MGTE soon.
THK87;1470175 said:
its alright man! you are'nt thread jackin! i asked you about your engine so its cool