New intercooler,turbo, and intake setup

[crucialval]

This is my lil bro he made all this stuff himself, he's learning but not to bad.


http://www.youtube.com/watch?v=7CR5y11kZTU

Try it now, It will work now.
Tell me what you think

 

[slightly_red_MA70]

It don't work...You gotta be his friend to see the pictures

 

[Kevin]

upload them to photobucket so we all can see it

 

[carter]

Upload to photobucket.com

 

[crucialval]

sorry i'll fix it

 

[mr1hamilton]

hey bro thanks for posting my vid

 

[88-7MGTE]

What happened with the hatch ?? I don't like it. Get it running i want to see what it does.

 

[kamikazemkiii]

Another NC local.. Looks good man, how much power you pushing?

 

[Kevin]

Wow looks awesome

 

[whitemike]

Good work but horrible selection of materials IMO

 

[crucialval]

I'm not a fan of the flex pipe, but it gets the job done for now. He is in college with two kids, money is tight.

 

[hvyman]

those are some massive ic pipes.

 

[mecevans]

lag monster

 

[Angry7M]

Is that the actual exhaust thats going to be left on the car?

 

[mr1hamilton]

i personally like the hatch i plan to redesing
ive got 60 bucks in all my materials not bad some freebees
ya probably hopeing for full boost by 4500 will sone swich to 1.05 t housing


more coments please

 

[Keros]

I recall a thread with some of the brainiacs discussing the fluid dynamics of intercooler system diameters. The general consesus was that to maintain any semblance of throttle response the intake system has to be as small as possible or intake air velocity drops off dramatically under low (or no) boost conditions.

Unless it's a +1000hp drag monster, a 4" intake may be excessive, is what I'm saying.

 

[suprafanatic]

get a really exhaust system on that thing, also that intercooler looks to small for the size of IC piping that your running. other than that it looks pretty beasty! I noticed one problem... your oil drain!! what is it doing? looks like it goes into a 90* over to the block?? I dont think thats a very good way to run the oil drain, you want it to be as straight down as possible

 

[SupraChrisMk3]

I think it would be killer to see this thing run but I'm not to sure about the home depot looking exhaust setup.

 

[OneJArpus]

buy some piping, not that expensive to get some cheap piping from an auto parts store, 10ft of straight piping 3'' runs me 30 bux. Redo that exhaust, i would be afraid of the exhaust temps melting that thing

 

[mr1hamilton]

this isnt advance flex pipe ith is way thicker it came from a big rig supplier they use it coming out of there turbos with no problems
detroit 60 series motors make way more exh temp and pressure