need some help w/ a part number....
- Thread starter bryanintexas
- Start date
I didn't think so either... but unless he wants to get a little more specific that's all he's getting from my N/A driving ass....
Actually, I didn't know if maybe it was just upside down in the pic or something. I did think it looked more like an aftermarket product though.
Actually, I didn't know if maybe it was just upside down in the pic or something. I did think it looked more like an aftermarket product though.
CRE said:
no, it`s for a "turbo-a" model if i am not mistaken.
any of you aussie guys w/ a parts catalog?!?
Thats the non restrictive Group A supra 3000 Pipe. Correct me if im wrong but Im pretty sure toyota does not have a part number for those as they are not made anymore.
CRE said:
i have the "source":naughty: to order it, or to see if it is still even available, i just need the part # from the epc where the car was made available, that is if it was set up as a replaceable part.
If it were made anymore, everyone would be buying them, and there would be plenty for everyone else. I'm 99% sure they were made for the Turbo A and nothing else. Rare part, limted run.
Also, if you could buy this, chances are, you'd be able to buy a mag. oil pan too. But you can't.
Also, if you could buy this, chances are, you'd be able to buy a mag. oil pan too. But you can't.
trydrew said:
Well, you are plain wrong. A fellow from down under bought the last few sets of the Turbo A duct. This was a year and a half ago. Brian has connections and he may be able to source a left over part if one is still available. You would not believe what may sit on a parts shelf in some dusty corner for many years.
Brian, It's easier to make your own.......I'm having one made.
cwd
Here's the part number for it: 17860-42060.
There's a huge difference between Group A and Turbo A. Turbo A is a factory produced, retail vehicle, as such parts will remain available for a long time, even though it was a limited production run.
That being said, it's always a gamble as to whether a part number will be in the North American system. This particular number is not.
You can't order this from a North American dealer, but, you can probably still get it in Japan I'd bet (perhaps Australia or New Zealand as well).
Good luck.
There's a huge difference between Group A and Turbo A. Turbo A is a factory produced, retail vehicle, as such parts will remain available for a long time, even though it was a limited production run.
That being said, it's always a gamble as to whether a part number will be in the North American system. This particular number is not.
You can't order this from a North American dealer, but, you can probably still get it in Japan I'd bet (perhaps Australia or New Zealand as well).
Good luck.
Jeff Lange said:
Jeff,
Thank you!! You are correct sir, it is not in the North American parts system, but I am 1 step closer to possibly getting there if they are still available.
"Brian, It's easier to make your own......."
.....for the cost of this of piece from Toyota, I do believe that's what I'm going to end up doing, but I'm gonna try to get cost and availability 1st.