need soarer 1jz wiring diagram

[johnverheij]

hi guys

im doing a 7m 1jz swap
i have a soarer 1jz with ecu

it seems that there is differrence betweem the wiring and plugs
i already found lots of info but that is all jza70 info

so i`m lookinf for a soarer wiring diagram

who can help me out here

thanks

 

[AF1JZ]

Help yourself out and search.

This is a thread I made.
http://www.supramania.com/forums/showthread.php?t=43888&highlight=soarer

Also, this link will give you the soarer wiring diagrams.
http://web.archive.org/web/20060323191804/www.1jz-gte.us/92Supra6.html

 

[eyesoarer6]

I know this is an old thread but anyone have any updated links for the SOARER wire diagram?

 

[destrux]

There's a sticky at the top of this forum with the wiring info, I just wired my 87' up with a JZZ30 soarer a/t swap using that info and it was all good.

 

[eyesoarer6]

I actually need the pinout diagram to the body plugs for the Soarer JZZ30.

 

[aphxero]

Those are hard to get. Grab a volt meter and make some?

 

[eyesoarer6]

I have 6 wires that are disconnected, I soldered 4 together now the engine starts but its throwing codes 13,14. I also have 1 ground that fell out of its pin, Im lost and dont know where or what harness(IK1,IK2,IJ1,IJ2) if came off.

Would oil on the CAS make it throw the 2 codes I have? I didnt put the front main seal on correctly and oil is shooting everywhere. Or, did I install the TB wrong and its skipping a tooth? TB was on correctly IIRC, all marks were lined up(cam marks, crank pulley on 0degress). I have everything off awaiting new front main seal and intake kit from DM.

 

[aphxero]

wow dude.

Take to a shop?