need new endlinks

[viper92086]

so i was trying to install my st sways today and i find out all my sway bar endlinks are rusted solid, i even had them soaked in pb blaster overnight and the air gun still can't get them off... so i'm just going to get new ones and cut the old now my question is from what i understand the sway bar needs to be parallel with the ground correct? so i was thinkin sti's use very similar endlinks just alot shorter

what do u guys think?

btw are the front and rear endlinks the same length? i can't remember if they were the same length or were the fronts a tad longer?

 

[garagefujimoto]

get the new endlinks from BIC, a sponsor of this site

enjoy!

http://www.supramania.com/forums/showthread.php?t=11525

 

[viper92086]

costs just as much as my sway bars did

 

[viper92086]

update i just found all 4 stock metal endlinks for 120 shipped.. not too bad still lookin around tho

 

[Matce]

120 for 4 ? thats SUPERcheap !

 

[plaaya69]

update i just found all 4 stock metal endlinks for 120 shipped.. not too bad still lookin around tho

Can I ask you where did you get them from?

Thanks.

 

[viper92086]

froogle type supra sway and look closely

 

[suprageezer]

Make your own out of heim joints and threaded rod or long grade 8 bolts and spacers. Before you do from what I have been told you'll need to reinforce the brackets on the frame though, evidently thats the weak link. You can get everything you need to make your own at the site below

http://www.mcmaster.com/