my auto is throwing codes 61 62 63 64. what can cause this problem. i just put this tranny in about two weeks ago. all i did was change the skid control sensor because it was different than my old one.
need help with auto tranny
- Thread starter chris1039
- Start date
gtsfirefighter
SM Expert on White trash
The ABS computer(skid control) is hooked with the trans control. After you check those wires dub said, come back.
I am not sure on what you have done yet. You needed a speed sensor, so you changed the trans?
I am not sure on what you have done yet. You needed a speed sensor, so you changed the trans?
when i changed the trans i got one from an 87na i had to change the wiring on the 87 trans to work with my 89 turbo wiring harness. the connectors are on nice and tight i even unplugged them and made sure they were clean and plugged them back in.
i have been driving the car for a week with no problems. oh i forgot to mention that my antilock light is on and speedo stopped working at pretty much the same time
i have been driving the car for a week with no problems. oh i forgot to mention that my antilock light is on and speedo stopped working at pretty much the same time
Last edited:
What exactly did you rewire?
Here's how to read ABS codes:
http://www.cygnusx1.net/supra/Library/TSRM/MK3/manual.aspx?Section=BR&P=51
Here's how to read ABS codes:
http://www.cygnusx1.net/supra/Library/TSRM/MK3/manual.aspx?Section=BR&P=51
i didnt do much i just switched the connectors going to the solenoids in the trans and the skid control sensor.
i checked the abs codes and it threww an 11 and 33 i think im going to drop the pan tommorow to see if one of the plugs came out.