ok so i did a is300 cop upgrade and turn on the car it drove fine, went around the block a couple a times everything was good. park it and called it a night and next morning i try to turn it on and it wouldnt. it cranks but doesnt turn on.
checked the usual, cps wires, grounds,battery terminals(green wire too),efi fuse,make sure vall plugs are plug up good and all other fuses but nothing then i noticed that when i crank it, the rpms dont jump like they use too when i cranked it.
then i noticed that when i put the ignition key on and turn it (not to start it but just to get the lights on the dash on) the check engine light wasnt comming on at all.
ive heard thats the ecu not getting signal, so i check the ground for the ecu and theyre good.
you guys think it could be the head/main relay??
any help is really appreciated!
checked the usual, cps wires, grounds,battery terminals(green wire too),efi fuse,make sure vall plugs are plug up good and all other fuses but nothing then i noticed that when i crank it, the rpms dont jump like they use too when i cranked it.
then i noticed that when i put the ignition key on and turn it (not to start it but just to get the lights on the dash on) the check engine light wasnt comming on at all.
ive heard thats the ecu not getting signal, so i check the ground for the ecu and theyre good.
you guys think it could be the head/main relay??
any help is really appreciated!