Need help QUICK!!!!

[airhead04]

So I pulled my upper intake mani off to fix a fuel leak I had from the injectors. I get the mani off with no Problem. I get everything ready to put back on, and notice a few (2) wires hanging down below the lower intake mani. So I take a look at them, and here is what I find:

They are the 2 wires that kinda look odd in the middle of the pictures. 1 wire is red/black, and the other wire is green/white.

I need help quick PLEASE. I need to know where they go, and if so, is it necessary to be plugged in?

 

[TweeT91109]

I had some wires like this on a old Na car, turned out to be wires for a knock sensor. This being a turbo motor, it could be a number of things. What color are the wires, are there any lines of a different color on the wires also. Someone on here can probably tell you from just the colors.

 

[airhead04]

Well the wire colors are posted above. lol

And someone actually helped me out in FC, SSIDE, IS THE MAN!!!!!! the wires are for the egr. So since I dont have egr, there is no need for the wires. I tapped them off and will let them be, incase for whatever reason I put egr back on. Thanks for the response though man! Appreciate it!