need help 1j swap

[perkelerttu]

where i should connct this? 1j engine harness or body harness
help?

 

[bigaaron]

where i should connct this? car is 89+ mk3... where it goes to engine harness or body harness
help?

You'll find the mating side to that 2 pin connector coming off the 1jz engine harness right by the alternator. Just extend it about 18".

 

[perkelerttu]

You'll find the mating side to that 2 pin connector coming off the 1jz engine harness right by the alternator. Just extend it about 18".

ok thanks!

 

[bigaaron]

The wires in the engine harness are white with green stripe, and white with red stripe.

 

[perkelerttu]

The wires in the engine harness are white with green stripe, and white with red stripe.

i found the wires thank you....

 

[perkelerttu]

what connector is that and where i connect it

 

[bigaaron]

See the two colors I talked about on the connector in the center of your pic...

 

[perkelerttu]

more help with wirings if some on could tell me where i connect these or do i just leave tohse lyin behind the clove box...




and where i connect pins 9 and 22 i use original hyd fan but no ok monitor?


some one plz help

 

[perkelerttu]

:1zhelp: