Need a little help figuring out what goes were.

[OneJArpus]

First pic, where does the nipple on the head go to? Where does the two nipples under the throttle body go to?

What is that hole under the freeze plug?

Where does this coolant line go to?

What is this plug for? (by the hydropump)

Also this is just informational.

JDM Trans that came with my clip. Has ABS sensor w00t.


Also, does anyone have a spare plug for this sensor (cam) IIRC

Damn thing broke on me! Bridle wires FTL

 

[Bigzavs]

nipple in first pic goes to the nipple in the second pic, for coolant flow goes back from the throttle to the ISCV down to the wraparound pipe

the third nipple is for the p/s idle up valve

thing under the freeze plug is for the oil pressure sensor

line on the water pump is for the stock twins, not needed unless u have a BB single turbo

plug in the picture is for some kind of stock exhaust temp sensor iirc

 

[OneJArpus]

nipple in first pic goes to the nipple in the second pic, for coolant flow goes back from the throttle to the ISCV down to the wraparound pipe

the third nipple is for the p/s idle up valve

thing under the freeze plug is for the oil pressure sensor

line on the water pump is for the stock twins, not needed unless u have a BB single turbo

plug in the picture is for some kind of stock exhaust temp sensor iirc

Thanks, i'm glad i saw that hole before i threw the motor in!. I guess i will use that for my feedline on my turbo.

Anyone happen to know the size?

 

[Bigzavs]

1/8th BPT or NPT, dont remember which one exactly

 

[OneJArpus]

oh goody! So i can use it as a feed line Thanks!