NA-T SAFC correction levels anyone?

[7mge-t_cressida]

I got a 7mge na-t with the following:

-stock ct26 turbo, mani, dp, and exhaust
-stock 7mgte 450cc injectors
-7mge electronics
-7mgte intercooler w/ piping
-safc 1

now what i need to know is what correction levels have you na-t with the same or similar setup have you set? low throttle and high throttle if you got them. also while on the subject what % did you guys set your throttle low and high levels at? im not gonna leave this i just want more info on what people have been successful with... just as a starting point to tune off of.

 

[86supra7mge-t]

off boost get ready to take out alot of fuel. Do you have any way to control timing? I said it once and I'll say it again, spend some $$ and get a afpr for a much easier way to tune the fuel.
It's pretty easy to "base tune" a 7mge-t with an afc. Just watch the wideband readings...

 

[7mge-t_cressida]

off boost get ready to take out alot of fuel. Do you have any way to control timing? I said it once and I'll say it again, spend some $$ and get a afpr for a much easier way to tune the fuel.
It's pretty easy to "base tune" a 7mge-t with an afc. Just watch the wideband readings...

yeah i just want something to "start out at" instead of retarded pig rich lol.

 

[drjonez]

as i've said before, it's not a good idea to use someone else's settings...