Na engine bay shots!
- Thread starter prism1
- Start date
Here's one of mine last year..I have no current picture, but now it has some mild mods and more DIRT...lol
Suprarook;1015073 said:Here's one of mine last year..I have no current picture, but now it has some mild mods and more DIRT...lol
Looks Good! Update with a new pic for god sakes! We have to see the dirt!
Ok, heres today's supra bay picture and I included my 4runner's motor for shits and giggles....you can tell the two motors they are related...
todays supra-told ya iz dirty...in process of repaint and body work so engine is neglected now!
4runner engine
todays supra-told ya iz dirty...in process of repaint and body work so engine is neglected now!
4runner engine
amichie;1016391 said:
EGR passage.
The Japanese don't use an EGR, so they don't run the passage.
If you put the JDM Y-pipe on a car with the EGR,
the EGR becomes a engine bay decoration,
and no longer puts exhaust into the manifold.
But it's still there to keep emission inspectors happy
Suprarook;1015876 said:Ok, heres today's supra bay picture and I included my 4runner's motor for shits and giggles....you can tell the two motors they are related...
todays supra-told ya iz dirty...in process of repaint and body work so engine is neglected now!
Looks like you got some oil on top of your spark plugs.... :-\
D TR41N;1016774 said:
I have oil everywhere... What u are seeing in the photo is the valve cover bolts on driver's side were loose and was leaking (i know...not good), I didn't notice this problem until I parked it for the winter and I just have not cleaned up the motor since.
Too damn busy fixing the dents/scratches/etc and sanding for my repaint, motor will get nice overall once bodywork complete.
ya i started the body work and after half way i had a rod knock and then after weeks it blew the #1 piston into the oil pan...haha But i started to smooth the body molding away with a bondo on the bottom and i still have to fiber glass over it a few layers i had a problem already with the front fender cracking a little
Looks like much more of a project than mine with the molding removal and fill in. I've heard mixed emotions on the trim removal, I think it looks nice that way, but must be a killer to get perfect, eh...
Hey.
Ohh I hav to show my pic inher to
That is just a categori for mee....NA engine bay!
Here is a pic from before i started my Itb setup!
100% standard MKII 1984.
Photo Hosting - PicTiger
And after many hours work,...
Photo Hosting - PicTiger
I like it clean.....Classic, and almost Original ;-)
Best Regards Jens Pedersen
Ohh I hav to show my pic inher to
That is just a categori for mee
....NA engine bay!Here is a pic from before i started my Itb setup!
100% standard MKII 1984.
Photo Hosting - PicTiger
And after many hours work,
...
Photo Hosting - PicTiger
I like it clean.....Classic, and almost Original ;-)
Best Regards Jens Pedersen
Nice and clean :icon_bigg
I put a fair amount of time under the hood last week. It developed a nasty misfire Tuesday and I was thinking “nice…another BHG” but it turned out to be just a wasted cap and rotor. But since I had the time I went ahead and changed out plugs to NGK iridiums, NGK wires, and new cap/rotor. While I had the plugs out, I did a compression check and came up with about 160 across the board. Previous owner had timing set way off also, now it is at 10 btdc and runs like a champ!
I put a fair amount of time under the hood last week. It developed a nasty misfire Tuesday and I was thinking “nice…another BHG” but it turned out to be just a wasted cap and rotor. But since I had the time I went ahead and changed out plugs to NGK iridiums, NGK wires, and new cap/rotor. While I had the plugs out, I did a compression check and came up with about 160 across the board. Previous owner had timing set way off also, now it is at 10 btdc and runs like a champ!
Here's mine when I still had it a month ago. It's a JDM 7MGE, it wasn't anywhere as clean as I wanted it to be but I could never find time to clean it up properly.
These were taken the day that I painted the Y-Pipe.
These were taken the day that I painted the Y-Pipe.