My opinion of Shaftmasters 2 piece shaft
- Thread starter suprahero
- Start date
POW, right in the kisser.
POW, right in the kisser.
POW, right in the kisser.
POW, right in the kisser.
POW, right in the kisser.
POW, right in the kisser.
POW, right in the kisser.
POW, right in the kisser.
POW, right in the kisser.
Jay,
I was thinking that if you hadn't let IJ talk you out of the one-piece aluminum shaft maybe you'd be squawking the tires in fourth gear also!
Robert
I was thinking that if you hadn't let IJ talk you out of the one-piece aluminum shaft maybe you'd be squawking the tires in fourth gear also!
Robert
So if I'm hearing right, what you're telling all of us, is you think you've found your torque???suprahero said:
I don't really know what to say, and I don't know what I found, and I could be imagining it. All I know is my car has never lost traction in third gear while rolling into third. I can always rev up and dump the clutch and spin the tires if I wanted too, but I can now spin them when the turbo spools up in third. I did change to the irridium plugs yesterday and it could be helping also and it could be a placebo induced wild imagination................:dunno:
I didn't quite make it to a 120 today but I did manage 100 and it was still just as smooth as 75. I'll be driving it tomorrow on the highway and will definately get to experience it at higher speeds. I promise not to hurt anyone while testing out my new driveshaft, so please dont' send me any hateful pm's...........:biglaugh:
I didn't quite make it to a 120 today but I did manage 100 and it was still just as smooth as 75. I'll be driving it tomorrow on the highway and will definately get to experience it at higher speeds. I promise not to hurt anyone while testing out my new driveshaft, so please dont' send me any hateful pm's...........:biglaugh:
So what does Shaftmasters want for the nice jewel of a shaft? I would like one for my "Damn Car".suprahero said:
Jet
Jetfixr757 said:
2 piece shafts are $625. $100 of which is a core charge, refunded upon receipt of your old front section. We pay UPS Ground to the continental US. You pay for return shipping of core. You can order 1 right here:
http://www.shaftmasters.com/store/i...id=237&zenid=184123b6b394001a1cc9a52f235ac79e
Thanks, David
that reminds me I came up with a question years ago with some pretty good backing to it. CK and a few others chimed in, earlier years of sm history about doing something similar because I noticed alot of HD trucks use this same idea. I got shunned for it and was told to get a 1 piece 
either way its still a nice product guys.
Thanks for the development of new parts!
either way its still a nice product guys.Thanks for the development of new parts!
If it wasn't for IJ there never would have been a Shaftmasters two-piece design. IJ, is it true that the women in Australia outnumber the men two to one?IJ. said:Justin: Not by me though
Robert
Last edited:
Robert: Nah it's fairly even here
At birth:1.05 male(s)/female
Under 15 years: 1.05 male(s)/female
15-64 years: 1.02 male(s)/female
65 years and over: 0.79 male(s)/female
Total population: 0.99 male(s)/female (2006 est.)
At birth:1.05 male(s)/female
Under 15 years: 1.05 male(s)/female
15-64 years: 1.02 male(s)/female
65 years and over: 0.79 male(s)/female
Total population: 0.99 male(s)/female (2006 est.)
I had friends in the Navy who told me stories of going to Australia and that at the end of the pier would be bulletin boards full of pictures of Australia women wanting to hook-up with American sailors.IJ. said:Robert: Nah it's fairly even here
At birth:1.05 male(s)/female
Under 15 years: 1.05 male(s)/female
15-64 years: 1.02 male(s)/female
65 years and over: 0.79 male(s)/female
Total population: 0.99 male(s)/female (2006 est.)
Robert
WOW! I can not tell you all how pleased I am with all this... ShaftMasters came here, asked me if they could sell... I explained the rules, and they were VERY understanding... They played by the RULES and did the right thing... Now, it's paying off big time... GREAT reviews, positive feedback, new products: I couldnt be happier... ShaftMasters is a shining example of what we here at SupraMania look for in a vendor... Thank you guys so much for taking care of this community... I hope you all are around for a long time to come!