MP t-64 on stock 7m

[kotu100]

finlly got to dyno my car today, with abolutely NO tune it made 358whp and 410wtq @ 14.5 psi. air fuel was 10.0-9.9 the whole run....
mods are bone stock 7mgte (unknown mileage) with felpro HG and ARP headstuds. 550c injectors, walbro 255, aeromotive afpr, lex afm, safcII, 3" downpipe to 3" tanabe cat-back and testpipe, chinaman t4 manifold mated to masterpower t-64 with .68 a/r and knockoff HKS wastegate.

 

[aznboik1mva]

no tune? dam i noticed that it was runnin a lil rich during the dyno

 

[queenskid926]

quick question wat size mouth is the mp t64? the stock accordion hose fit over it with no problem?

 

[kotu100]

its 4", i have to get a 4-3" adaptor

 

[queenskid926]

can u post a pick of your setup strictly the intake? So you have a 4"-3" coupler going to the stock afm, meaning your not using the accordian hose at all? Or you have a 4"-3" coupler a pice if 3" piping and then slid the accordian hose on that and then the afm to the accordian hose?

 

[kotu100]

can u post a pick of your setup strictly the intake? So you have a 4"-3" coupler going to the stock afm, meaning your not using the accordian hose at all? Or you have a 4"-3" coupler a pice if 3" piping and then slid the accordian hose on that and then the afm to the accordian hose?

http://www.supramania.com/forums/showthread.php?t=99590
have a whole bunch of pics in there, more specifically post #48 has the pics you want.

i used the reducer coupling to a piece of 3" piping to accordian hose to afm

 

[HKS_TRD]

Sorry to go Off Topic, reply by PM if you like

Looked in your link there, any more details on those gauges in your dash?

 

[turbodriz]

if u can lean it into the 11.4 range it will yeild more hp. ur running dog rich.

 

[7Mboost]

You have an SAFC but you have no tune....?

 

[dbsupra90]

t64? they had horrible surge issues with the 7m. also, you seriously need a tune. good job so far.

edit: nevermind, i see you have the ported shroud housing.

 

[kotu100]

the gauges im using are cheap knockoffs, ill be replacing them with some cyberdyne gauges soon enough.

There was no tune because i just put the walbro in the day before, and upped the boost a bit at the dyno so i didnt have a chance to tune it. Plus i have a maft pro awaiting install so it woula been pointless anyway.

I tried doin research on the t64 before i got it but coulnt find much info on it, im still gettin a lil bit of surge with it, but only at really low boost.


Once the maft pro goes in, its gettin bumper to 17psi and gettin tuned to 11.8 so im hoping to see numbers around 420whp, 480wtq, gonna need a new clutch too tho, im still on the oem one.

 

[FullNelson]

lol That turbo will make your clutch smell funny.

 

[Supra28]

Those are some really great numbers!

 

[mhopemk3]

Nice job! I also have the T64 and @16psi tuned with maft Pro. I only have 245/50's on the back and I will tell you that top of 1st and 2nd I am spinning tires.. So get that thing tuned and you will see a big difference.. I hope to hit the dyno pretty soon!

 

[kotu100]

thanks guys!

im running 16-17psi now, w/ a/f's around 11.2-11.6 this damn thing pulls beastly!