im using a Haynes manual but i cant seem to find the motor mount torques anywhere, mines a 91 7mgte with semi-solid mounts from driftmotion.
motor mount torque
- Thread starter san supra
- Start date
Now i cant get my dipstick tube in, does anyone have any tricks? I just replaced the the o-ring on it.
on the motor mounts im doing 55 ft/lbs, that should be good enough.
on the motor mounts im doing 55 ft/lbs, that should be good enough.
This should help with your torque settings: http://www.cygnusx1.net/Supra/Library/TSRM/MK3/manual.aspx?S=B&P=2
And the dipstick tube is going to be tight with a new O ring. Lube the O ring with fresh engine oil, get it lined up, put a block of wood over the end and give it a few solid whacks, should slide in.
And the dipstick tube is going to be tight with a new O ring. Lube the O ring with fresh engine oil, get it lined up, put a block of wood over the end and give it a few solid whacks, should slide in.
those bolts should be 7t by the way. Just did this, fucking pita. Couldnt get a tq wrench on the block mounts to save my life (motor in car).