Map sensor wiring help

[dslocal]

I am wiring in a AEM 3.5 bar map and need to know which wire from the stock 1jz map sensor is the ground, output, and supply voltage
there is a
Brown:
Blue/Black:
Greenish/Black:

Any help would be appreciated

 

[Biggu]

Im also interested in knowing, I havent tried to install mine but just thought it would be nice to know before trying to install it.

Edit:

Brown: Ground
Blue/Black: 5v
Greenish/Black: signal wire

Thanks to DR.Tweak he gave me these color codes.

 

[dslocal]

you know what, I just called Dr. Tweak this morning and he told me the same thing, I got it in and everything seems fine.
Thanks for the help, if you need any help w/the install let me know.

 

[Biggu]

you know what, I just called Dr. Tweak this morning and he told me the same thing, I got it in and everything seems fine.
Thanks for the help, if you need any help w/the install let me know.

Did you have to re tune your AEM with putting the new map in or did you just change it over in the EMS and call it done?

 

[dslocal]

In the AEM you do have to set it to read the 3.5 bar map because it uses a different voltage range. But Its really simple because the AEM pro 1.0(software on laptop) Has different map sensor calibrations saved in. you just need to pick the right one. Its explained more in the manual.