can the maft-pro support these? meaning would i have to run sequential injection or anything to get it to idle normally with these injectors or can I just pull fuel as I regularly would with my 550s?
maft-pro + 780cc injectors
- Thread starter black91turbo
- Start date
If I remeber right you can. You would just take the difference between the stock 440s and 780s. 77.27% bigger, So you would decrease your fuel tables by that much. Someone correct me if im wrong as this is all off memory of what i've read.
FullNelson;1262870 said:
Yikes.
Sure, you can do that, but realize the change in timing is going to be HUGE. You'll really have to dial back the advance to keep things in line.....or run C16 every day and keep the boost reasonable.
To the OP- As I've always said, if you're looking at injectors that big, you should be thinking about a standalone.
Thanks for the clarification doctor, I was hoping youd chime in and verify what needed to be done. What is the largest injector you would suggest go with a maft pro? 680s maybe? or just 550's?
EDIT: apparantely my math is off and it should be -43%.
http://www.supramania.com/forums/showpost.php?p=1158487&postcount=1
5th paragraph..
EDIT: apparantely my math is off and it should be -43%.
http://www.supramania.com/forums/showpost.php?p=1158487&postcount=1
5th paragraph..
Last edited: