M2 Prefoemance exhaust

[Angry7M]

I paid $500 bucks to have an exhaust made locally and it sounded like shit.
Buy a proper exhaust otherwise it will be waste of money.

That being said the only cheap alternative I would consider would be this one
http://www.suprasport.com/Pacesetter-25-Cat-Back_p_277.html

Being 2.5” it may limit you if you go for more power but should be better then stock.
The actual exhaust will be dual tip unlike the picture shown.

Have you owned this exhaust? I had it on my Supra and it performed like crap and sounds even crappier... Total waste of money IMHO... I threw it away once I upgraded the whole exhaust.

 

[Poodles]

The pacesetter is fine as a replacement for a rusted out exhaust. Beyond that, don't expect much.

 

[dubsupra209]

eBay look up apexi, greddy, blitz, tenabe, hks ect make sure it's 3in (80mm). Get one off there then take it to your local exhaust shop they should be able to Mandral bend it for you for around $200 with 8ft of 3in pipping.

 

[Poodles]

eBay look up apexi, greddy, blitz, tenabe, hks ect make sure it's 3in (80mm). Get one off there then take it to your local exhaust shop they should be able to Mandral bend it for you for around $200 with 8ft of 3in pipping.

He's NA, he doesn't want 3" at all since it's going to be crazy loud if he goes that large...

 

[synystermk3]

I'm NA for now planning on a 1j swap over the summer most likely

 

[Poodles]

I'm NA for now planning on a 1j swap over the summer most likely

I suggest waiting then on the exhaust as a 3" on an NA is VERY loud.

 

[synystermk3]

Ok I'm probably going to end up just living with the rusty pipes till they fall off or I do the swap what ever comes first

 

[Poodles]

If there's holes, there's patch kits that are pretty cheap that can be found at any autoparts store.

 

[synystermk3]

It's doesn't have holes yet but it's getting close

 

[dubsupra209]

He's NA, he doesn't want 3" at all since it's going to be crazy loud if he goes that large...

Sorry op I didn't read the whole page lol

 

[Insidious Surmiser]

Ok, I've welded up my own exhaust (worked, sounded GREAT... using magnaflow muffler) also bought a BIC exhaust w/ magnaflow muffler which guess what... sounded GREAT... I also had another one done locally when I lived in Va, EXCELLENT work... What it breaks down to is what you use, and who you have put it together... If they have no rep... it's an obvious shot in the dark. OH and if you're N/A I'd probably stay stock.... just sayin.