Lost some screws. Help!

[drostar]

I took my glove box out, placing the screws in nicely labeled zip-lock bags as I went along, and then put all the small zip-lock bags into a big zip-lock bag so they were all collected in one place... and then I lost the big zip-lock bag.

Does anyone know how to figure out what size of screws I need to replace the ones I lost? From the Electronic Parts Catalog (http://www.cygnusx1.net/supra/library/EPC/MKIII_NATO/291420/5501_1.html) or otherwise?

 

[willfish]

that sux man, wish i could give you some advise, if its any consolation,, I have a few scews loose or even lost too :icon_wink

Will

 

[inline6]

I'm pretty sure there is only like 4 sizes of screws (maybe a few more) but 95% of them are the same one. Just pull one out of (almost anywhere) and go have it matched up at NAPA or somewhere. Thread doesnt matter so much because most of the screws, screw into little plates or clips and tighten down on them. You can get a sample from the center section that goes over your radio, shifter, etc, by your right knee or under the dash by the ignition lock cylinder, or from the trim that goes over the top of the gauges..... On second thought I'll just get you the NAPA part number.

 

[inline6]

Balkamp pn# 665-2043 at NAPA

 

[koulee]

No offense but :rofl:. You sure you didn't accidentally install the bag with all the screws in it behind teh glove box? It happens sometimes...