Looking For Intercooler Hard Pipes! ANy one ??

[Northbaysupra]

Hi So I finally got my Project rolling and it would be great Not to Start my new car with a intercooler full of Oil. I have a new intercooler Xo2 Racing yes I know it probably not the best but better than stock.

But i Need Some Hard Pipes! any one ?

 

[magnus_heydoc]

these days hard pipes are very cheap..........try ebay and it should be somewhere around 200 bucks.

 

[scotty]

eBay ftw..

 

[Supraflymk3]

go to driftmotion they have a full ic kit with bov for $388 shipped. I don't know if they sell the hardpipes seperately though.

 

[noel]

I KNow Driftmotion sells Pipes/intercoolers and all the couplers u need.. SupraSport.com also has the same stuff PLUS u can buy Pipes Piece By PIece For A REAL Custom IC Hook up

 

[rayall01]

I got a CX racing IC kit off ebay, and I'm extremely happy with it. It was a universal kit, with enough piping for the supra, and it went in without a lot of trouble, and works fine.

 

[lumpy]

I ordered a full set off ebay from ETD motors/CX racing to fix a massive boost leak(right off the compressor housing). $250 to my door. Fitment is good, piping isn't too thin either. The only modification I did was welding a bung in for my intake temp sensor. IMO it's a good price even if you have to adapt the pipes to fit a side-to-side IC or if u have a different BOV. I have a Turbo XS so the stock location works fine. Good luck!

 

[Fubar231]

Damn i was out at the shop today but forgot to get some pics of the lower. Ill try and get that for you tomorrow since ill be out there tomorrow.

---------- Post added at 11:39 PM ---------- Previous post was at 11:36 PM ----------

Was looking around and came across this, this is the EXACT website i ordered my IC kit from.

Seems like this could work good.
http://store.max-redline.com/servlet/-strse-433/Toyota-Supra-7MGTE-7M-dsh-GTE/Detail

And this is the 100% Exact kit i ordered
http://store.max-redline.com/servlet/-strse-435/Toyota-Supra-7MGTE-7M-dsh-GTE/Detail

Thanks jag.

Ill try and get better pictures for you guys this weekend. If i find anymore ill upload them, let me go see if i have anymore. I know i have some of the IC on stock piping... Ill post a few.

This might matter to some people, but this is the ic next to the stock oil cooler.

Heres my "Ic bracketing" and my transcooler. I got that bracket from home depo, but cut it down. It worked and it very sturdy. Might make a lower sometime.

Heres a pic with the stock intercooler, and my trans cooler before i relocated it above.

Another shot of the piping from the tb onwards

Yes i know my PVC hose was unplugged, thats actually why i took that pic

And heres a pic i took while i was mocking everything up

Thats all i have in my photobucket for now, ill take some more this weekend for you if you still have questions. Ill try and get a pic of the lower ic piping while its till on the lift.

From another thread.

 

[Northbaysupra]

thank for the pic yea looks like u had to do some custom work ur self for the intercooler.

 

[hvyman]

Ebay 45 bux. Or you could go to a metal tubing place and get 10ft of steel tubing for 30 bux.

 

[Angry7M]

Ebay 45 bux. Or you could go to a metal tubing place and get 10ft of steel tubing for 30 bux.

And make the car's front end even heavier?


You can get a full DIY 2.5" Intercooler pipes with a bead on them, couplers and T clamps for under 100dlls.