Looking for a good Clutch. help!

[Angry7M]

So im to be swapping a R-154 5 speed trans in my 89 supra. I want to put in a good clutch that will hold and a light weight flywheel. I was looking on ebay and found this XTD clutch. Yes ive read the sticky on XTD, but i was thinking that maybe it would work for my application, since my soup isl lightly modded? I think ive also heard a combo using a stock new clutch with an upgraded pressure plate? can anyone explain how this setup works?

Im under a budget BTW. So any ideas for a clutch and light weight flywheel without braking the bank? LOL

http://cgi.ebay.com/ebaymotors/XTD-...ryZ33730QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

My Mods:
K&N air intake
10 PSI on stock CT
2.5" hard piping
3" exhaust
and a few other small things.

Thanks

 

[Poodles]

XTD are known scammers, why would you give them ANY business?

Try Driftmotion's Action clutches or get ahold of CKanderson...

 

[Angry7M]

XTD are known scammers, why would you give them ANY business?

Try Driftmotion's Action clutches or get ahold of CKanderson...

PMd him


Any other ideas?

 

[MKTURBO3]

spec stage 3 !

 

[rumptis]

When I get away from my stock clutch I will be getting one of these.

http://store.driftmotion.com/productdetails.php?sid=1478ce5a07270f&product_id_int=390

 

[skim1040]

CKanderson FTMFW!!

My clutch died and he hooked me up with a good deal on the ACT clutch kit

 

[Angry7M]

Anyone know if these clutches are any good?
http://cgi.ebay.com/ebaymotors/EXED...007QQitemZ170186081414QQrdZ1QQsspagenameZWDVW

 

[ms07s]

Friend of mine had one on his civic SI turbo. It broke while he was at the track.:biglaugh:

 

[Angry7M]

And what about this SFI flywheel?
http://cgi.ebay.com/ebaymotors/SFI-...023QQitemZ360013229790QQrdZ1QQsspagenameZWDVW

 

[ms07s]

....just remember you get what you pay for! Stop looking at fleeBay and PM your needs and budget to a few of our local vendors and see what they can do for you!

 

[Angry7M]

the clutch broke?

 

[Angry7M]

Ive been trying to get a hold of CKanderson but he hasnt responded to my PM yet.

 

[Angry7M]

ANyone know Ckanderson's messanger?

 

[Fletch124]

Ckanderson = FTW

 

[Scot]

Which ever one you decide, just make sure you check the balance before it is installed. I bought a ACT and had to send it back because it had such a heavy spot. I took it off, mounted it to a vise so it could free spin, video taped it and sent it back to ACT. Even with video proof they still denied that there was any problem. However, when I got it back, it had fresh drill/ balancing holes in it and it was in perfect balance.

They claimed there was NO WAY their clutches could be out of balance.... well it was...

Check the balance...