I am not sure if this is the right place for this. I am stripping a Jza clip of useable parts. I found what I think is an oil cooler It is about two feet long has a single pipe that loops with heat sink fins was attatched to bumper support by three ten mm bolts along with this is the outside temp sensor so I believe that when the bumper support is on the car the "cooler" is on the underside. if this is what I assume it is can I get a detailed description or pics of the routing to and from so I can use this on my ma70. I totally lucked out with this. I get all the usuable parts just for scraping it when I am done. The guy just wanted the 1j for his cressy I get every thing else woo hooo