Just blew my 1j stock twins

[honestabe]

My poor Supra's twins are blown. Guess that means I have to upgrade to a single turbo setup. Damn it!:biglaugh: Any suggestions as far as what turbo setup to go for? I've called 935 to have Robert put together a setup for me. So far my list includes the following:

Single turbo (duh!!!)
Manifold
Downpipe that's wideband ready
440cc or larger injectors
Stage 4 clutch kit (600 HP rating)
Spark plugs
Oil and oil filter
FMIC and piping
SCD
Intake

Anything else I am forgetting?

 

[supramike7m]

custom intake
wastegate
oil lines

 

[tlo86]

intake will be easy to rig up though - if you want to buy my k&n 4'' inlet 9'' long im sellin it ;p

 

[honestabe]

intake will be easy to rig up though - if you want to buy my k&n 4'' inlet 9'' long im sellin it ;p

Let me find out what turbo I'm getting first and I will get back to you. I'm waiting on Robert to let me know what he has available.

 

[JASONA70]

what turbo are you going to run?

 

[honestabe]

I may pick-up Brian Urbano's Master Power T-70 T4 turbo.

 

[bloodasp90]

a t-70, you dont happen to have the specs on that turbo? cause i got two T4 manifolds in my wall locker right now if you need one?

 

[pimptrizkit]

Buy a drewgo manifold

 

[honestabe]

a t-70, you dont happen to have the specs on that turbo? cause i got two T4 manifolds in my wall locker right now if you need one?

http://www.supramania.com/forums/showthread.php?t=69933&highlight=master+power

Pimptrizkit, I will be getting a Drewgo manifold.

 

[pimptrizkit]

Make sure you buy a LEGIT wastegate, don't want to see you blowing your motor because of a knock off sticking and spiking your boost. We'll have to line you up with my brothers car again and see how much of a difference that T-70 is compared to your twins. Seemed a little close last time!

 

[honestabe]

This is the setup I'm buying.

935 DIY FMIC kit
MKIV 2JZ-GTE injectors
2JZ-GTE cams already machined for the 1J
HKS FCD
Drewgo manifold ceramic coated
Stainless oil line set
4” intake kit aluminum w/ large 4” k&n
3” vband downpipe
Vband kit
T61 935 polished Turbo w/ 1 year warranty
Tial 44mm vband wastegate
90 degree adapter
Stage 4 clutch kit
HKS DLI

 

[OneJoeZee]

something to tune with?

edit: wait, you have an afc right? that'll do for now.

 

[honestabe]

Yup. I have an Apexi SAFC NEO, PLX M-300 Wideband, AEM Tru-Boost guage/controller, and an Aeromotive FPR. I also have John at RRev to make my motor purr like a kitten.

 

[rakkasan]

This is the setup I'm buying.

935 DIY FMIC kit
MKIV 2JZ-GTE injectors
2JZ-GTE cams already machined for the 1J
HKS FCD
Drewgo manifold ceramic coated
Stainless oil line set
4” intake kit aluminum w/ large 4” k&n
3” vband downpipe
Vband kit
T61 935 polished Turbo w/ 1 year warranty
Tial 44mm vband wastegate
90 degree adapter
Stage 4 clutch kit
HKS DLI

Very similar to mine, love it!

 

[honestabe]

Voice of reason just hit me. I'm going to just replace the stock twins with a good set. Although I will be upgrading the FMIC setup, adding an FCD, 2J machined cams, and MKIV 2J injectors.

 

[SupraMaster]

So what was this "voice of reason"? Money? The honey? Practicality?

 

[honestabe]

Technically my mom's fiance reminding me of how quick I could get the Supra back on the road and also reminding me of how much it will really cost me. On top of the fact that I've been trying really hard to pay off my loan on the Supra.

Adam

 

[SupraMaster]

^That would definitely do it, yeah. Good choice. Just remember that these avenues are still open when you get the money together to try again.

 

[honestabe]

I'm extremely confident that there will be a lot more avenues available once I am ready.

 

[pimptrizkit]

dang still twins, i started to work on my mark 2 again.


i have the pump installed and the pan on, r154 is going on tomorrow. if im lucky I might start it this week. :evil2: