I'm trying to find out how to put on my domes. I'm looking on the TSRM website to find a blow up of the foglights so i can "take" out the bulb and put my domes on...can someone help me out?
JDM fog dome conversion
- Thread starter PROJECT N00b
- Start date
do you mean the "yellow" capsules that go on the inside to make the bulb appear yellow? if so, they drop in before the bulbs and are held in w/ screws on the JDM/Euro fogs. No more difficult than changing bulbs.
so in order to put the domes in i need to remove the lens? because i was trying to figure out how to do it last night...and there was a rubber cover that was pretty much stuck to the housing.
the rubber thing just pulls out...
maybe yours is melted, if that's the case, then try to cut a small slit and work from there...
maybe yours is melted, if that's the case, then try to cut a small slit and work from there...
Buy yellow bulbs .
MKIII N00b said:
Once spot light lens is in your hand.....
See the base that the bulb is cliped into
Around the edge are a few pieces bent inward to hold bulb base in
Bend these tags out to remove bulb base
Slide in collar to hold yellow lens
Place yellow lens inside
Refit bulb base then bend back taps to loacte
Refit spots to car........ enjoy your car now looking like a prelude.
FYI: i already have the domes...im just trying to figure how to expose the bulbs or atlest get them out of the way so i can put in the domes...
Wow, i didn't realize those capsules could be fitted to pre-89 fogs...thanks or the info, Jason!
work on one spot on the rubber boot on the back (it's on tight to stop water from getting in there!), and get a finger under it and work around getting it unstuck, then it should pull off