JDM 2jzgte with 5speed?

[THE1JZSPECIAL]

Hows it goin folks, I was wondering if it could be possible to bolt up a
5 speed R-154 or IS300 tranny to a JDM 2jzgte engine Because those 6 speeds are expensive.

 

[supramike7m]

yes you can.

 

[JustinGotA1j]

All you need to bolt up the r154 is a jz bellhousin iirc. I believe driftmotion sells them.

 

[THE1JZSPECIAL]

All you need to bolt up the r154 is a jz bellhousin iirc. I believe driftmotion sells them.

does That mean my tranyy bolts up? I have 1jz that came with a r154 (complete swap package)

 

[annoyingrob]

does That mean my tranyy bolts up? I have 1jz that came with a r154 (complete swap package)

Get a 1JZ bellhousing. 1JZ and 2JZ use the same bolt pattern. The 1JZ bellhousing will allow you to bolt the R154 to the 2JZ. Alternatively, a MKIV N/A bellhousing will allow you to bolt it to the IS300 tranny (W58)

 

[tturnpaw]

ditch the w58 if you have it. I doubt the w58 could even hold a GTE's power, or at least for a decent amount of time. What you need completely to bolt to the r154 is the 1j bellhousing, 1j flywheel, and i strongly suggest new flywheel bolts (even if they are arp's) driftmotion has everything you need.

Also....7m or 1j clutch.

 

[THE1JZSPECIAL]

ditch the w58 if you have it. I doubt the w58 could even hold a GTE's power, or at least for a decent amount of time. What you need completely to bolt to the r154 is the 1j bellhousing, 1j flywheel, and i strongly suggest new flywheel bolts (even if they are arp's) driftmotion has everything you need.

Also....7m or 1j clutch.

My tranny is a 1jz R-154, Yea those w58s can't take the power

Thanks