Is this ok to do?

[David D]

On my 7mgte, Im running two lines that come directly off my valve cover breather ports and lead directly to the ground for any excess oil that might be blown out. I have connected a line from the TB port to the accordion hose port where the original PCV system would hook up to. Is this ok to do? does it in any way effect my PCV system. I have read the various articles on this form but still do not know if this is ok to do.

any insight would be great thanks!

 

[Poodles]

Yes, as you've completely disabled the system... Hook it back up as stock so it actually puts sucking on the crank case...

 

[MK3Supraman]

why dont you just get an oil catch can

 

[ms07s]

Hook it back up stock if you like your seals.

 

[Poodles]

Hook it back up stock if you like your rings.

ftfy

 

[David D]

Ok so, two lines off the valve covers------> to a catch can, then another line from the catch can to--------> the TB port with a T going to-------> the accordion hose.?

is that a good set up?

 

[MK3Supraman]

Throttle body T'D off on both valve covers to can

then can to stock intake port

 

[David D]

Does the catch can have to have anything inside it?

 

[grimreaper]

you should t the tb back into it like stock. no tb port = no vac at 95% of engine run time (anytime your not in boost).

put it back to stock

 

[David D]

Does the catch can have to have anything inside it?

 

[Davismj711]

I run this one..

http://www.mckinneyraceworks.com/catalog/product_info.php?products_id=80


Also below is a link to a long but very well thought out install on the CC.

http://www.supramania.com/forums/showthread.php?t=43167

 

[hvyman]

tb port and accordion hose into one port on the cc and the 2 valve covers into the other.
you want constant vacuum pulling the air from the valve covers threw the cc. if you tee the valve covers and tb port on the same line its not gunna go threw the cc and waste your time installing it.