Is this normal (one wheel burnout)

kotu100

Active Member
Nov 23, 2006
1,899
0
36
Easton, Ma
mine does this sometimes too, but mine spins the right tire lol.

theres a sticker on it that says LSD in red letters hehe
 
shenronzero;1180772 said:
if you were holding the brake too hard it might have not let it spin

thats what i was thinking. it's a/t and i had the brake all the way down.

i was thinking one side might have more pad left and was just holding it tighter, but i'm not sure as of yet.

i need to just jack it up and put it in gear.

my tags and all indicate it should be lsd.
 
jacked it up and both wheels spun, so i am figuring my LSD is fine.

I still plan to change the oil in it asap.

hey but guess what? While I was checking that, a ton of antifreeze spilled out from the front of the engine bay and the stock temp gauge went skyrocketing. new adventure everyday.
 

RazoE

Boobs/Boost, my favorite
Jun 13, 2006
4,946
3
38
39
Los Angeles
www.cafepress.com
modmonster2008;1185417 said:
is there any other way to make a open diff. an LSD instead of swapping it out? and what differences are there between open diff and LSD?



many folks weld their LSD's creating a solid rear axel, but your tires will be dragging when making slow turns...


also it's ghetto...
 
what im going to do is get the lsd shims and shim it to get the correct preload. if this works and remains working, i am good.

if not im going with a kaaz 2 way. but this isn't for a long time. i dont have a manual so im not launching, plan on doing no more burnouts, and have about 30 projects on top of each other right now.